Matronics Email Lists :: View topic - Middle Balance Fairlead

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Middle Balance Fairlead

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

johnd(at)data-tech.com
Guest

Posted: Sun Aug 10, 2008 4:10 pm Post subject: Middle Balance Fairlead

Hi  All,

 

I'm working on finishing the rigging on my  quickbuild 601XL and have a problem with the middle balance fairlead. On my  quickbuild it appears to be mounted too high on its support such that the  balance cable contacts the right rudder cable where it passes under it.

  

Looking at the plans (6-b-22) it shows the balance  cable some distance below the rudder cable. I have looked at that page  several times now and cant find any details on how high the balance fairlead  should be mounted above the bottom skin. 

 

Has  anyone else encountered this issue or how high did you mount your fairlead  ?

 

Thanks,

John Davis

601XL QB  & Jab 3300

Burnsville, NC

 

    [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Davcoberly(at)wmconnect.c
Guest

Posted: Sun Aug 10, 2008 4:48 pm Post subject: Middle Balance Fairlead

I just ran a string from one side to the other where it exits the sides and pushed it down enough to have good clearance to locate where to put my fairlead.  While were on this subject I have question.  The cable that runs to the lower elevator control that passes through between the seats' the upper fairlead' my cable rubs the lower part of the fairlead and the plans call for it to rub the upper part of the fairlead the reason for offsetting the fairlead on the hole drilled in the seat back to lower part of the hole. I cannot for the life of me find where I went wrong. This is a dual stick set up. Has anybody else had this happen?    David     [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

amyvega2005(at)earthlink.
Guest

Posted: Mon Aug 11, 2008 7:40 am Post subject: Middle Balance Fairlead

I had the issue,  Just move it to where it does not touch anything.  No need for the perfect spot mathematicall gyrations,  just move it to where is does not touch other cables.



Juan



--

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum