Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 25704
Location: Livermore CA USA
|
 Posted: Sun Sep 07, 2008 7:22 pm Post subject: My Interpretation Of Tip Installation... |
 |
|
Dear Listers,
Today marks the completion of my RV-8 Tail including all of the
fiberglassing and tip installation. I had asked the List a while
back about filling the backs of the tips on the Vert/Horz Stabs and
got some great feedback. I used some hard foam and built a "dam" and
glassed the inside then rapped the outside with tape and filled with
resin/flockedcotton and then sanded it down to the right
size. Worked great and the next time I could do the whole thing in a
couple of days.
Rather than glassing over the whole end of the surface onto the
fiberglass tips, I opted to just mount using screws and platenuts and
only glassed AL-to-tip on the Elevator counterbalances where
necessary. They came out very nice I think with minimal fuss and
muss. Since the Rudder bottom and Fin Top had to be removable for
access to wiring, I decided that I wanted everything to look the same
and so I used the screws and platenuts throughout. Really didn't add
that much weight and allows for tip removal down the road without
paint damage.
The mount for the VOR/GS/LOC antenna on the Vert Stab came out very
nice I think and is very solid.
I definitely learned a lot about fiberglassing in the last couple of
weeks as well as gel-coating.
Lots of pictures attached.
Best regards,
Matt Dralle
RV-8 #82880 - N844RV (res)
| | - The Matronics RV7-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV7-List |
|
| Description: |
|
| Filesize: |
77.05 KB |
| Viewed: |
369 Time(s) |
|
| Description: |
|
| Filesize: |
88.29 KB |
| Viewed: |
341 Time(s) |
|
| Description: |
|
| Filesize: |
98.9 KB |
| Viewed: |
343 Time(s) |
|
| Description: |
|
| Filesize: |
97.17 KB |
| Viewed: |
327 Time(s) |
|
| Description: |
|
| Filesize: |
87.98 KB |
| Viewed: |
343 Time(s) |
|
| Description: |
|
| Filesize: |
101.86 KB |
| Viewed: |
338 Time(s) |
|
| Description: |
|
| Filesize: |
190.38 KB |
| Viewed: |
326 Time(s) |
|
| Description: |
|
| Filesize: |
119.44 KB |
| Viewed: |
356 Time(s) |
|
| Description: |
|
| Filesize: |
112.47 KB |
| Viewed: |
357 Time(s) |
|
| Description: |
|
| Filesize: |
89.63 KB |
| Viewed: |
329 Time(s) |
|
| Description: |
|
| Filesize: |
84.69 KB |
| Viewed: |
355 Time(s) |
|
| Description: |
|
| Filesize: |
114.39 KB |
| Viewed: |
334 Time(s) |
|
| Description: |
|
| Filesize: |
154.52 KB |
| Viewed: |
337 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
