ch701builder
Joined: 07 Feb 2006 Posts: 119 Location: N38.9947,W105.1305,ALT. 9,100'
|
Posted: Tue Sep 23, 2008 5:07 am Post subject: AN Rivet sizes |
|
|
All, (both lists)
Articles involved for rivets sizes
Standard Practices for Aluminum – AN470-d-l == diameter – length
Example:
Standard Practices for Aluminum -- AN470-4-4 == 4/32" (1/8") dia by 4/16" (1/4") length
Standard Practices for Aluminum -- AN470-4-6 == 4/32" (1/8") dia by 6/16" (3/8") length
Construction Standards by Zenith Aircraft Company Draft Edition (01/16/07) == page 27 of 42 CS#402 is stated as AD???-l-d ( length - diameter == the opposite of the Standard
701 plans = page 7F9 (cabin side), their documentation is AN470-4-4; AN470-4-5; AN470-4-6 I am assuming it follows the standard, and are meaning 1/8" rivets with different lengths.
Can some 701 builders look at their cabin sides and see if all the rivets are 1/8" (to the best of their ability, since the rivets are already driven)
Also, should somebody point this out to Zenith?
Guess I should also try to find a newer version on their website.
Thanks all,
Keith
CH701 -- scratch
N 38.9940
W 105.1305
Alt. 9,100'
This e-mail and any files transmitted with it may be proprietary and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender.
Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of ITT Corporation. The recipient should check this e-mail and any attachments for the presence of viruses. ITT accepts no liability for any damage caused by any virus transmitted by this e-mail.
[quote][b]
| - The Matronics Zenith701801-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|