Matronics Email Lists :: View topic - RV-8 Nylon Flap Bolt Interference...

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

RV-8 Nylon Flap Bolt Interference...

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

Matt Dralle
Site Admin

Joined: 08 Nov 2005
Posts: 25858
Location: Livermore CA USA

Posted: Sat Sep 13, 2008 3:42 pm Post subject: RV-8 Nylon Flap Bolt Interference...

Dear Listers,



Have a look at the attached photo.  The rear predrilled holes for 

mounting the flap weldment nylon blocks seems to interfere with the 

seatbelt attachment.  Am I missing something here?  The blocks are 

drilled according to the plans and the rear holes are already drilled 

and have the platenut installed.  Do I just added some washers above 

and below and call it good?  Seems hokey.  Notching the belt attach 

also seems like a poor idea.



Thanks,



Matt Dralle

RV-8 #82880 N844RV

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

2008.09.13_-_RV-8_Flap_Install_-_Bolt_Interference.jpg

Description:

Filesize:

66.88 KB

Viewed:

201 Time(s)

_________________
Matt Dralle
Matronics Email List Administrator

chaskuss(at)yahoo.com
Guest

Posted: Sun Sep 14, 2008 2:45 am Post subject: RV-8 Nylon Flap Bolt Interference...

Matt,

 My nylon blocks were so poorly made, that I decided to make a proper set of replacement pieces myself. I noted the same problem you did. I counter-bored the tops of my parts to allow the use of SHCS (socket head cap screws aka Allen head bolts) to retain the flap weldment. This eliminated the interference issue you have noted. Using the SHCSs also eases future maintenance of this assembly. 

Charlie Kuss

PS Sorry, but I never took any photos of this mod. If needed, I suppose I could take a few.

--- On Sat, 9/13/08, Matt Dralle <dralle(at)matronics.com> wrote:



 	  Quote: 	
		   From: Matt Dralle <dralle(at)matronics.com>

 Subject: RV-8 Nylon Flap Bolt Interference...

 To: rv-list(at)matronics.com

 Date: Saturday, September 13, 2008, 7:39 PM

 Dear Listers,

 

 Have a look at the attached photo.  The rear predrilled

 holes for 

 mounting the flap weldment nylon blocks seems to interfere

 with the 

 seatbelt attachment.  Am I missing something here?  The

 blocks are 

 drilled according to the plans and the rear holes are

 already drilled 

 and have the platenut installed.  Do I just added some

 washers above 

 and below and call it good?  Seems hokey.  Notching the

 belt attach 

 also seems like a poor idea.

 

 Thanks,

 

 Matt Dralle

 RV-8 #82880 N844RV

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum