Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

eMag/pMag issues

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Mon Sep 22, 2008 9:11 am Post subject: eMag/pMag issues

If anyone is considering using any of the eMag products, I strongly suggest you do your research.  I have heard of frequent problems and failures of them over the years and have had discussions with some of you relaying what I have heard from others.  Marc Zeitlin and others have had quite a bit of discussion lately on the Cozy builders list and some of that discussion has trickled over into the Aeroelectric and other lists and I felt it was pertinent for any of you that are interested in Emagair.    

   

  Below are a couple of links to discussions on this subject.  Marc has documented his experience and discussions with others on the Cozy builders website.  If you don’t know Marc he has the credentials to backup what he says having graduated from MIT and working as an ME for upwards of 30 years including currently working on SS2/WK2 for Scaled.  

   

  I have no hunt in this but I know some of you have been very interested in the upcoming 6cyl version.  Read the following items, do your research, make your decisions accordingly.  Be safe!  

   

Michael  

   

http://www.cozybuilders.org/Emagair_Warning/  

http://www.maddyhome.com/cozysrch/ search for “emagair”  

      [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

robin1(at)mrmoisture.com
Guest

Posted: Mon Sep 22, 2008 10:55 am Post subject: eMag/pMag issues

Michael,  

            Using a single eMag or pMag is no problem because if it goes bad you always have the Slick Mag to rely on in an emergency….Oh… wait…can anyone recommend a good parachute?  

   

Robin  

Do Not Archive  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder (Michael Sausen)

 Sent: Monday, September 22, 2008 10:11 AM

 To: rv10-list(at)matronics.com

 Subject: eMag/pMag issues  

  

  

   

  If anyone is considering using any of the eMag products, I strongly suggest you do your research.  I have heard of frequent problems and failures of them over the years and have had discussions with some of you relaying what I have heard from others.  Marc Zeitlin and others have had quite a bit of discussion lately on the Cozy builders list and some of that discussion has trickled over into the Aeroelectric and other lists and I felt it was pertinent for any of you that are interested in Emagair.    

   

  Below are a couple of links to discussions on this subject.  Marc has documented his experience and discussions with others on the Cozy builders website.  If you don’t know Marc he has the credentials to backup what he says having graduated from MIT and working as an ME for upwards of 30 years including currently working on SS2/WK2 for Scaled.  

   

  I have no hunt in this but I know some of you have been very interested in the upcoming 6cyl version.  Read the following items, do your research, make your decisions accordingly.  Be safe!  

   

Michael  

   

http://www.cozybuilders.org/Emagair_Warning/  

http://www.maddyhome.com/cozysrch/ search for “emagair”   	  Quote: 	
		    http://www.matronics.com/Navigator?RV10-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

      [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

n8zg(at)mchsi.com
Guest

Posted: Mon Sep 22, 2008 11:31 am Post subject: eMag/pMag issues

Strong Enterprises… <;-P   

neal  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

 Sent: Monday, September 22, 2008 1:54 PM

 To: rv10-list(at)matronics.com

 Subject: RE: eMag/pMag issues  

  

  

   

Michael,  

            Using a single eMag or pMag is no problem because if it goes bad you always have the Slick Mag to rely on in an emergency….Oh… wait…can anyone recommend a good parachute?  

   

Robin  

Do Not Archive  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder (Michael Sausen)

 Sent: Monday, September 22, 2008 10:11 AM

 To: rv10-list(at)matronics.com

 Subject: eMag/pMag issues  

  

  

   

  If anyone is considering using any of the eMag products, I strongly suggest you do your research.  I have heard of frequent problems and failures of them over the years and have had discussions with some of you relaying what I have heard from others.  Marc Zeitlin and others have had quite a bit of discussion lately on the Cozy builders list and some of that discussion has trickled over into the Aeroelectric and other lists and I felt it was pertinent for any of you that are interested in Emagair.    

   

  Below are a couple of links to discussions on this subject.  Marc has documented his experience and discussions with others on the Cozy builders website.  If you don’t know Marc he has the credentials to backup what he says having graduated from MIT and working as an ME for upwards of 30 years including currently working on SS2/WK2 for Scaled.  

   

  I have no hunt in this but I know some of you have been very interested in the upcoming 6cyl version.  Read the following items, do your research, make your decisions accordingly.  Be safe!  

   

Michael  

   

http://www.cozybuilders.org/Emagair_Warning/  

http://www.maddyhome.com/cozysrch/ search for “emagair”   	  Quote: 	
		     http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution   	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		    	
0 	  Quote: 	
		    	
1 	  Quote: 	
		    	
2 	  Quote: 	
		    	
3 	  Quote: 	
		    	
4 	  Quote: 	
		    	
5 	  Quote: 	
		    	
6 	  Quote: 	
		    	
7 	  Quote: 	
		    	
8 	  Quote: 	
		    	
9

        [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Mon Sep 22, 2008 12:21 pm Post subject: eMag/pMag issues

True, but I believe if it starts firing 180 out, as was the case for a couple of these, you won’t really have anything left for the slick to burn.  Like I said no dog in this, I already made my ignition decisions.  Just wanted to pass along the info and it sounds like they are trying to address the issues.  I do find it interesting that a lot of supporters start out by saying that they have had couple of in flight failures but are very happy with them.  You Slick mag owners must be ecstatic with yours!  J  

   

Michael.  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks

 Sent: Monday, September 22, 2008 1:54 PM

 To: rv10-list(at)matronics.com

 Subject: RE: eMag/pMag issues  

  

  

   

Michael,  

            Using a single eMag or pMag is no problem because if it goes bad you always have the Slick Mag to rely on in an emergency….Oh… wait…can anyone recommend a good parachute?  

   

Robin  

Do Not Archive  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder (Michael Sausen)

 Sent: Monday, September 22, 2008 10:11 AM

 To: rv10-list(at)matronics.com

 Subject: eMag/pMag issues  

  

  

   

  If anyone is considering using any of the eMag products, I strongly suggest you do your research.  I have heard of frequent problems and failures of them over the years and have had discussions with some of you relaying what I have heard from others.  Marc Zeitlin and others have had quite a bit of discussion lately on the Cozy builders list and some of that discussion has trickled over into the Aeroelectric and other lists and I felt it was pertinent for any of you that are interested in Emagair.    

   

  Below are a couple of links to discussions on this subject.  Marc has documented his experience and discussions with others on the Cozy builders website.  If you don’t know Marc he has the credentials to backup what he says having graduated from MIT and working as an ME for upwards of 30 years including currently working on SS2/WK2 for Scaled.  

   

  I have no hunt in this but I know some of you have been very interested in the upcoming 6cyl version.  Read the following items, do your research, make your decisions accordingly.  Be safe!  

   

Michael  

   

http://www.cozybuilders.org/Emagair_Warning/  

http://www.maddyhome.com/cozysrch/ search for “emagair”   	  Quote: 	
		    http://www.matronics.com/Navigator?RV10-Listhttp://forums.matronics.comhttp://www.matronics.com/contribution  ;      - The RV10-List Email Forum -http://www.matronics.bsp;          - MATRONICS WEB http://forums.matronics.com</================== 	
=                              -Matt Dralle, List Admin.[/b][/quote]http://www.matronics.com/con[/b] [b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

dlm46007(at)cox.net
Guest

Posted: Mon Sep 22, 2008 1:07 pm Post subject: eMag/pMag issues

Aircraft Spruce sells parachutes. I used one for the test  period on my 10. It is one of the few aircraft you could actually use a  parachute without a lot of special rigging to get rid of the door.Mine is a  National 425. Kind of pricey but if needed priceless.

   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Neal  George

Sent: Monday, September 22, 2008 12:30 PM

To:  rv10-list(at)matronics.com

Subject: RE: eMag/pMag  issues

Strong Enterprises… <;-P   

neal 

From:  owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin  Marks

Sent: Monday, September 22, 2008 1:54 PM

To:  rv10-list(at)matronics.com

Subject: RE: eMag/pMag  issues

Michael, 

             Using a single eMag or pMag is no problem because if it goes bad you always have  the Slick Mag to rely on in an emergency….Oh… wait…can anyone recommend a good  parachute? 

Robin 

Do  Not Archive 

From:  owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of RV Builder  (Michael Sausen)

Sent: Monday, September 22, 2008 10:11  AM

To: rv10-list(at)matronics.com

Subject: eMag/pMag  issues

  If anyone is considering using any of the eMag  products, I strongly suggest you do your research.  I have heard of  frequent problems and failures of them over the years and have had discussions  with some of you relaying what I have heard from others.  Marc Zeitlin and  others have had quite a bit of discussion lately on the Cozy builders list and  some of that discussion has trickled over into the Aeroelectric and other lists  and I felt it was pertinent for any of you that are interested in Emagair.    

  Below are a couple of links to discussions on this  subject.  Marc has documented his experience and discussions with others on  the Cozy builders website.  If you don’t know Marc he has the credentials  to backup what he says having graduated from MIT and working as an ME for  upwards of 30 years including currently working on SS2/WK2 for  Scaled. 

  I have no hunt in this but I know some of you have  been very interested in the upcoming 6cyl version.  Read the following  items, do your research, make your decisions accordingly.  Be  safe! 

Michael 

http://www.cozybuilders.org/Emagair_Warning/ 

http://www.maddyhome.com/cozysrch/  search for “emagair” 	  Quote: 	
		     http://www.matronics.com/Navigator?RV10-List http://forums.matronics.com http://www.matronics.com/contribution   	
0 	  Quote: 	

1 	  Quote: 	

2 	  Quote: 	

3 	  Quote: 	

4 	  Quote: 	

5 	  Quote: 	

6 	  Quote: 	

7 	  Quote: 	

8 	  Quote: 	

9 	  Quote: 	

0 	  Quote: 	

1 	  Quote: 	

2 	  Quote: 	

3 	  Quote: 	

4 	  Quote: 	

5 	  Quote: 	

6 	  Quote: 	

7 	  Quote: 	

8 	  Quote: 	

9

 	  Quote: 	
		  http://www.matronics.com/Navigator?RV10-List 	
0   [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum