|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
hotwheels
Joined: 01 Jun 2007 Posts: 240
|
Posted: Sun Nov 02, 2008 6:22 am Post subject: Source for high temp red silicone grommets? |
|
|
A high temp red silicone grommet is used around the fuel hose that traverses through the intercylinder cooling baffle between the upper fuel injection spider and the lower servo body. My engine started out life as an O-540, so I get to drill a baffle hole and somehow obtain the proper grommet.
Checking the list of usual suspects (Spruce, Wicks, google, etc) wasn't very fruitful. Searching the Lyco parts manual didn't turn up a part number either (unless I missed it). Does anyone know where high temp grommets can be found?
Thanks in advance for any replies. Handy grommet doc is attached.
Cheers,
Jay
FWF stuff while procrastinating on door fitting
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
Description: |
|
Download |
Filename: |
Grommets ms35489.pdf |
Filesize: |
482.75 KB |
Downloaded: |
630 Time(s) |
|
|
Back to top |
|
|
Kellym
Joined: 10 Jan 2006 Posts: 1705 Location: Sun Lakes AZ
|
Posted: Sun Nov 02, 2008 7:00 am Post subject: Source for high temp red silicone grommets? |
|
|
I don't have 6 cyl parts manual, but for the 4 cyl engines it is an
AN931-12S17 grommet. Suspect the 6 cyl injected engines use same
grommet. MS35489 is the correct replacement number. Genuine Hardware
lists them in their catalog. You will need to know inside diameter
needed and groove width needed. (pg 182-183 in the catalog I have).
jbrinkmeyer wrote:
Quote: |
A high temp red silicone grommet is used around the fuel hose that traverses through the intercylinder cooling baffle between the upper fuel injection spider and the lower servo body. My engine started out life as an O-540, so I get to drill a baffle hole and somehow obtain the proper grommet.
Checking the list of usual suspects (Spruce, Wicks, google, etc) wasn't very fruitful. Searching the Lyco parts manual didn't turn up a part number either (unless I missed it). Does anyone know where high temp grommets can be found?
Thanks in advance for any replies. Handy grommet doc is attached.
Cheers,
Jay
FWF stuff while procrastinating on door fitting
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p 11750#211750
Attachments:
http://forums.matronics.com//files/grommets_ms35489_148.pdf
|
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________ Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD |
|
Back to top |
|
|
hotwheels
Joined: 01 Jun 2007 Posts: 240
|
Posted: Mon Nov 03, 2008 9:22 am Post subject: Re: Source for high temp red silicone grommets? |
|
|
Red high temp silicone grommet for intercylinder baffle fuel hose...
Referencing the Lyco IO-540 Parts Manual pg 3-9: AN931-12S17 Grommet 3/4 ID x 1-3/8 OD x 3/8 thick.
A bit of research turned up AN931-12S17 is superseded by: MS35489-20X
The part was difficult to find and scarce at a reasonable price. The best of the bunch was Broadies Aircraft out of Texas (~$18 each):
http://www.broadiesaircraft.com/shop/search.asp?lookup=MS35489-20X
Regards,
Jay
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|