Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

CJ goodies update

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

barryhancock

Joined: 09 Oct 2008
Posts: 285

Posted: Thu Oct 30, 2008 6:51 am Post subject: CJ goodies update

Gang,



We are just a few orders short to run the second set of pedal brackets for

the CJ...order now so you can have them by Christmas...or have your wife

order them.  I'm sure more toys for your airplane is first on her list of

things to get you anyway.  



We've started in on the Yak rudder pedal mod.  It is only slightly

different than the CJ bracket due to the difference in throw and the spar

to contend with.  We should have the prototype soon.  I'll keep you

posted.



Also, we have the first production set of  31 gallon aluminum tanks

completed and the installation is 95% done. It's been a process to get the

tanks where we want them, but it's looking very good now.  We're working

on installations in 3 aircraft concurrently, so we should be pretty smart

on these things soon.  You can email me off line for photos.



We have contracted with LP Aero for our Malcom Hood front and exclusive

one piece rear.  They have been great to work with and their UV reducing

plastic is a great idea for our "green house" cockpits to protect the

interior and keep you from getting sunburned and overheated on those long

cross countries.



Finally, we are the exclusive distributor for the Aircraft Exhaust systems

stainless steel slip joint exhaust system for the Housai engine.  The slip

joint system makes for easier installation, no clamps (which leak and

loosen, which means more CO in the cockpit).  They have 3" extensions on

them as well to reduce CO levels.



Please contact me us at info(at)worldwidewarbirds.com if you would like

further information or to place an order.



Thanks,



Barry

-- 

Barry Hancock

Worldwide Warbirds, Inc.

office (909) 606-4444

cell (949) 300-5510

www.worldwidewarbirds.com

_________________
Barry Hancock
Worldwide Warbirds, Inc.
www.worldwidewarbirds.com

gill.g(at)gpimail.com
Guest

Posted: Thu Oct 30, 2008 8:49 am Post subject: CJ goodies update

Barry,



I didn't think the YAK List was a marketing venue.



Gill



--

cd001633(at)mindspring.co
Guest

Posted: Thu Oct 30, 2008 9:13 am Post subject: CJ goodies update

Gill,



As a long time YAK List dweller, my opinion is that new products and services announcement are legit and very much of interest to our group - this list provide Current information about the CJ/Yak world.  Where else can we find out about new products/services etc.  Regular/frequest advertising on this List is another matter.  I don't think Barry is doing that. 



FWIW,



Sam Sax

Miami



--

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Thu Oct 30, 2008 9:18 am Post subject: CJ goodies update

As a User testimonial, I stand 6'3" and 240lbs, occasionally serve as a

GIB in Hal Morley's #8 (Chinese Yak).  I was involved in the removal of

the old corroded factory pedals and installation of the shiny new ones.

I have 23+ flight hours on the retrofit operation. I can give the Good,

the Bad, the Ugly along with my final Grin assessment.  If anyone wants

a testimonial before christmas '08, or would like me to talk to your

wife, please contact me at the offline email in the header above.  If

she is a Trophy Wife, I can offer my cellphone and can Jump on the

airline at a moment's notice.



I have no connection with the Marketing of this product.



"Ducking for Incoming and Checking my Six".



John Cox - Oregon



--

dougsappllc(at)gmail.com
Guest

Posted: Thu Oct 30, 2008 9:19 am Post subject: CJ goodies update

Geeze Gil, I didn't hear any outcry from you when we (include me here) were touting the benefits of your fuel cell mod.........or would you prefer to read about rather we should have to wear flight suits at RPA functions or not, or who can and who should not do missing man formations, or maybe watch a video of some guy getting shot in the guts by his kid, is that more in line with what you feel the list is for?  No complints from you on those topics.  Christ man, What you did with your fuel cells and what Barry is doing IS what this list is all about.  Getting the word out about mods and improvements is very important to the community at large.  I have asked the group on several occasions about rather or not they wanted to see my postings about this type of subject and the only one nay sayer was the sharp spoken gentleman from Ohio who is no longer in the Yak/CJ community.  Most all replied that if they didn't have an interest they would simply exercise their god given right to delete, you can do the same.  As in the past YMMV.

   

 Always Yakin

 Doug

 On Thu, Oct 30, 2008 at 9:48 AM, Gill Gutierrez <gill.g(at)gpimail.com (gill.g(at)gpimail.com)> wrote:

 [quote]--> Yak-List message posted by: "Gill Gutierrez" <gill.g(at)gpimail.com (gill.g(at)gpimail.com)>

 

Barry,



I didn't think the YAK List was a marketing venue.



Gill

  

 

--

gill.g(at)gpimail.com
Guest

Posted: Thu Oct 30, 2008 9:54 am Post subject: CJ goodies update

John, 



That's a great testimonial which does belongs on the YAK List.  I just don't

think taking orders and using the list as a customer communication venue is

right. Perhaps I too should alert everyone on the YAK List that I provide

fuel cells for both the YAK52's and CJ's.  There are 30 CJ installations and

6 YAK installations without a problem.



I'm on the YAK List because it keeps me informed issues fellow owners are

encountering.



Gill



--

gill.g(at)gpimail.com
Guest

Posted: Thu Oct 30, 2008 10:04 am Post subject: CJ goodies update

Doug,  

   

You sell more stuff for CJ than anyone else.  I have always seen you respond questions as you should and not advertise.  

   

Gill    

         

  

From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of doug sapp

 Sent: Thursday, October 30, 2008 10:19 AM

 To: yak-list(at)matronics.com

 Subject: Re: CJ goodies update  

  

     

Geeze Gil, I didn't hear any outcry from you when we (include me here) were touting the benefits of your fuel cell mod.........or would you prefer to read about rather we should have to wear flight suits at RPA functions or not, or who can and who should not do missing man formations, or maybe watch a video of some guy getting shot in the guts by his kid, is that more in line with what you feel the list is for?  No complints from you on those topics.  Christ man, What you did with your fuel cells and what Barry is doing IS what this list is all about.  Getting the word out about mods and improvements is very important to the community at large.  I have asked the group on several occasions about rather or not they wanted to see my postings about this type of subject and the only one nay sayer was the sharp spoken gentleman from Ohio who is no longer in the Yak/CJ community.  Most all replied that if they didn't have an interest they would simply exercise their god given right to delete, you can do the same.  As in the past YMMV.  

    

   

    

Always Yakin  

    

Doug  

    

On Thu, Oct 30, 2008 at 9:48 AM, Gill Gutierrez <gill.g(at)gpimail.com (gill.g(at)gpimail.com)> wrote:  

--> Yak-List message posted by: "Gill Gutierrez" <gill.g(at)gpimail.com (gill.g(at)gpimail.com)>

 

 Barry,

 

 I didn't think the YAK List was a marketing venue.

 

 Gill      



 --

ByronMFox(at)aol.com
Guest

Posted: Thu Oct 30, 2008 10:17 am Post subject: CJ goodies update

Thanks for the outdate, Barry.   I love my CJ rudder peddle mod, and want to remain abreast of everything your doing. Never hesitate to keep us informed. ...Blitz

**************

Plan your next getaway with AOL Travel.  Check out Today's H71803/aol?redir=http://travel.aol.com/discount-travel?ncid=emlcntustrav00000001)  [quote][b]

talew(at)bellsouth.net
Guest

Posted: Thu Oct 30, 2008 11:05 am Post subject: CJ goodies update

Keep the updates coming Barry.

 Terry Lewis

 [quote]   ---

barryhancock

Joined: 09 Oct 2008
Posts: 285

Posted: Thu Oct 30, 2008 11:37 am Post subject: Re: CJ goodies update

Guys,



Thanks for the support.  Gil, thanks for validating our product.  



This list is about sharing information, innovation, troubleshooting, hangar stories, lies, safety, politics (aviation related, of course), and MM lore, amongst many others.  



I'll do my best to keep CJ and Yak drivers informed of products and services we offer to the community.  



Regards,



Barry

_________________
Barry Hancock
Worldwide Warbirds, Inc.
www.worldwidewarbirds.com

gill.g(at)gpimail.com
Guest

Posted: Thu Oct 30, 2008 12:02 pm Post subject: CJ goodies update

Barry,



You're welcome.



Gill



--

p.goswick(at)cox.net
Guest

Posted: Thu Oct 30, 2008 12:46 pm Post subject: CJ goodies update

thank you

Phil Goswick



---

mark.bitterlich(at)navy.m
Guest

Posted: Thu Oct 30, 2008 1:27 pm Post subject: CJ goodies update

Doug,  



Make sure you tell the poor man what you REALLY think. 



Adding another vote to the list.... I would rather see stuff like this,

even if it is FLAGRANT ADVERTISING (which this was NOT) than to read one

more word about MMF's MMO, FS's, Parachutes, Formation Flight (of any

freaking kind), or RPA issues.  



There, now I have gone and done it (AGAIN)!  Well... Let me take that

back.  I always love hearing more good stories about Marvel Mystery Oil,

simply because it smells so darn good!  Real men splash it on their

Flight Suits (FS's) before attending RPA functions, try to avoid the

parachutes though.  



To be SPECIFIC: 



1.  I would like to see an article written by Bill Blackwell on his M-14

engine piston and cylinder conversion package. 

2.  I would like to see an article on spark plug wire conversion kits.

All of them.  

3.  Info on where 50 drivers are currently getting chevron (and other)

seals for their landing gear actuators.  

4.  A report by Tom Johnson on the FW-190 prop he has on his 50 and how

it is holding up and a report on performance.  

5.  Knowledge on hyd. Brake conversions for any of the YAK or CJ models.



6.  Discussion on how to replace the DNP-200 Combined Device without

performing the $1000 ++ B&C Alternator mod.  If you own a YAK, you

better start thinking about this!  

7.  Etc.  



Mark

  



--

gjhagstrom(at)aol.com
Guest

Posted: Thu Oct 30, 2008 3:58 pm Post subject: CJ goodies update

I  vote for this also ...................

  

 Gary

 N34FP (CJ6A)

 

   	  Quote: 	
		   	  Quote: 	
		  	
	


 

 

 --

ChangDriver

Joined: 15 Sep 2007
Posts: 266

Posted: Thu Oct 30, 2008 6:25 pm Post subject: Re: CJ goodies update

Mark:



Those are excellent suggestions on topics.  I'm sure we'll see some of them covered in the RPA Red Alert in the future.



Craig

flushjohnson(at)charter.n
Guest

Posted: Thu Nov 06, 2008 4:06 pm Post subject: CJ goodies update

Gill I have your cells in N39YK and think they are the greatest thing since 

sliced bread. At Osh you told me of the improvements to the cells. I cant 

remember what you told me. This is whwre you should post your products so 

every one in the community can have the oportunity to improve their aircraft 

with the things available. Some of us dont have the ability or incolinaction 

to spend hours surfinf the internet to get

info. That is what the YAK List is for. Please send info on your latest fue 

cell design for the CJ.

From: "Gill Gutierrez" <gill.g(at)smail.com>

To: <yak-list(at)matronics.com>

Sent: Thursday, October 30, 2008 11:54 AM

Subject: RE: CJ goodies update

[quote] 



 John,



 That's a great testimonial which does belongs on the YAK List.  I just 

 don't

 think taking orders and using the list as a customer communication venue 

 is

 right. Perhaps I too should alert everyone on the YAK List that I provide

 fuel cells for both the YAK52's and CJ's.  There are 30 CJ installations 

 and

 6 YAK installations without a problem.



 I'm on the YAK List because it keeps me informed issues fellow owners are

 encountering.



 Gill



 --

mark.bitterlich(at)navy.m
Guest

Posted: Thu Nov 06, 2008 4:26 pm Post subject: CJ goodies update

I could not agree more Forrest.   



Gill, possibly arguing the cost with individual buyers might not be

within the realm of what this list is for (like I should talk anyway),

but speaking for myself, I have absolutely NO PROBLEM with any

professional seller in the YAK or CJ fraternity letting people know of

the general or specific products they sell ON THIS LIST, possibly with a

reminder to contact them OFF list for prices, orders, or delivery

issues. Doug Sapp has done this and I am very very glad he has, as he

has saved me a lot of effort looking elsewhere, PLUS, I feel we should

support one of our own whenever possible.  Yourself included!   



Making people aware of what is out there, even if you are the one that

MADE it available in the first place, is totally different than the

definition of what a "customer communication venue" is defined as.  Ok,

well... Maybe it really could be defined as a "communication venue"  but

you know what?  INTENT counts for something too, and I have met VERY

VERY few people on this list that did not have good intent at heart.

Certainly 100% of those currently participating.    



Mark Bitterlich

 



--

keithmckinley

Joined: 11 Aug 2008
Posts: 434

Posted: Thu Nov 06, 2008 9:35 pm Post subject: Re: CJ goodies update

Barry,



You've been a good source of info! I would love to hear about ANY new idea, mod, product that you have...I'm looking fwd to getting the pedal mod! 



Keith

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum