 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
ElleryWeld(at)aol.com
Guest
|
 Posted: Sat Nov 08, 2008 5:22 am Post subject: 503 cabin heater |
 |
|
That heater is a piece of crap I know two people that have bought them and they are not long lived, I made a better one for my Firestar out of Stainless steel you can see pic's of it in the Photoshare and it will fit in a small area and it works great
Ellery in Maine
do not archive
In a message dated 11/8/2008 8:05:17 A.M. Eastern Standard Time, nahsikhs(at)elltel.net writes:
AOL Search: Your one stop for directions, recipes and all other Holiday needs.l?redir=http://searchblog.aol.com/2008/11/04/happy-holidays-from-aol-search/?ncid=emlcntussear00000001 ">Search Now.
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
 |
Tom Jones
Joined: 12 Mar 2006
Posts: 752
Location: Ellensburg, WA
|
| Posted: Sat Nov 08, 2008 6:11 am Post subject: Re: 503 cabin heater |
|
|
Okay you guys are giving me some good ideas. Thanks Ellery, I looked at your pictures and they helped as well as some another sent to me.
Heres what the 503 installation looks like in my kitfox. Anyone with more ideas or comments I would like to hear/see them.
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
898.97 KB |
| Viewed: |
372 Time(s) |
|
_________________
Tom Jones
Classic IV
503 Rotax, 72 inch Two blade Warp
Ellensburg, WA |
|
| Back to top |
|
|
Tom Jones
Joined: 12 Mar 2006
Posts: 752
Location: Ellensburg, WA
|
| Posted: Sat Nov 15, 2008 2:57 pm Post subject: Re: 503 cabin heater |
|
|
Thanks to the ideas sent to me I built the heater and tested it today. I just put a restrictor plate on the hot air duct and 2" scat hose through the firewall between my feet. It's a 10 big dogs breath heater. The CHT's behaved just fine. I like things simple so there are no contrlos, just put the restrictor plate on for the winter and take it off for the summer. I could make a couple different sized restrictor plates for when it gets real cold I guess. ground adjustable only. Pictures attached.
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
166.41 KB |
| Viewed: |
397 Time(s) |
|
| Description: |
|
| Filesize: |
225.93 KB |
| Viewed: |
336 Time(s) |
|
| Description: |
|
| Filesize: |
184.69 KB |
| Viewed: |
326 Time(s) |
|
_________________
Tom Jones
Classic IV
503 Rotax, 72 inch Two blade Warp
Ellensburg, WA |
|
| Back to top |
|
|
lcottrell
Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or
|
| Posted: Sat Nov 15, 2008 5:55 pm Post subject: 503 cabin heater |
|
|
Tom,
If you did it the way that I think you did then all you will have to do is make a alum fitting that goes through the firewall with a swing gate inside the fitting to either open or close the gate. Attaching your scat tubing to the new fitting.
Larry C, Oregon
[quote] ---
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
do not archive |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
