Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Mk2. Flap System

Matronics Email Lists Forum Index -> Rocket-List

View previous topic :: View next topic

Author Message

Rainair

Joined: 13 Feb 2007
Posts: 10

Posted: Fri Nov 28, 2008 11:50 am Post subject: Mk2. Flap System

Hello,



I'm searching this flap system :



http://www.pflanzer-aviation.com/fuselage78.jpg



can everybody help me ?

- The Matronics Rocket-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List

lschneider39(at)cox.net
Guest

Posted: Fri Nov 28, 2008 11:59 am Post subject: Mk2. Flap System

Looks like an RV8 electric flap system

---

- The Matronics Rocket-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List

rickgray(at)roadrunner.co
Guest

Posted: Fri Nov 28, 2008 1:22 pm Post subject: Mk2. Flap System

Hi,

Good Luck finding this set up as Mark isn't making this stuff for the time 

being. I have this same set up (MKII) on my flying F1 Rocket. My current F1 

Rocket project has the MKI set up and I'm converting it to the MKII.....only 

because I want the flap bar at the aft end of the rear seat cushion. I 

purchased the 6" throw flap motor from Team Rocket and the RV8 flap torque 

tube from Vans (the RV8 runs a 5" throw motor). The RV8 torque tube is close 

but no cigar and will have to be cut in half and shortened by about 1.5". In 

addition the motor attach will have to be relocated. Then, I'll have to make 

my own 'doghouse' to cover the torque tube under the seat cushion. Probably 

NOT worth the effort and the money but I already have the parts so I figure 

I'll use them. Plus it messes up the left side arm rest arrangement for the 

passenger.



If you want the MKI parts let me know. I have all the hardware, motor that 

attaches to the floor, and the torque tube.



Good Luck,

Rick Gray in Ohio at the Buffalo Farm



---

- The Matronics Rocket-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List

Rainair

Joined: 13 Feb 2007
Posts: 10

Posted: Fri Nov 28, 2008 11:25 pm Post subject: Re: Mk2. Flap System

Good Morning,



of course, can you send me picture, drawings and your price what you want to my email adress RaReubelt at aol.com ?



Thanks,

Rainer

- The Matronics Rocket-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Rocket-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum