Matronics Email Lists :: View topic - 3M flap anti chafe tape

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

3M flap anti chafe tape - update

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Wed Dec 03, 2008 2:01 pm Post subject: 3M flap anti chafe tape - update

I thought I'd post the results of the overnight test. I applied a 10" x 

1" piece of the 3M tape using the 'wet' method. Let it 'cure' overnight 

and today I peeled it off ........ along with some of the clear coat and 

the base coat !!!!!

So. conclusion, although the tape itself when you peel off the backing 

paper doesn't feel super sticky to the finger touch. If applied 

following the instructions it appears it has plenty of adhesion 

strength!!!!!



Thanks for the feedback from others

Deems Davis # 406

'Its all done....Its just not put together'

http://deemsrv10.com/

 	  Quote:

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Tim Olson

Joined: 25 Jan 2007
Posts: 2879

Posted: Wed Dec 03, 2008 2:17 pm Post subject: 3M flap anti chafe tape - update

Is that tape supposed to be an "install once, never replace" tape,

or what do they market it like?  Do they have a removal method

that wouldn't do that?



Tim Olson - RV-10 N104CD - Flying

do not archive

Deems Davis wrote:

 	  Quote: 	
		   

 

 I thought I'd post the results of the overnight test. I applied a 10" x 

 1" piece of the 3M tape using the 'wet' method. Let it 'cure' overnight 

 and today I peeled it off ........ along with some of the clear coat and 

 the base coat !!!!!

 So. conclusion, although the tape itself when you peel off the backing 

 paper doesn't feel super sticky to the finger touch. If applied 

 following the instructions it appears it has plenty of adhesion 

 strength!!!!!

 

 Thanks for the feedback from others

 

 

 Deems Davis # 406

 'Its all done....Its just not put together'

 http://deemsrv10.com/

>

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

dogsbark(at)comcast.net
Guest

Posted: Wed Dec 03, 2008 2:26 pm Post subject: 3M flap anti chafe tape - update

....maybe a heat gun on low setting? 

  

Sean Blair 

#40225 

  

do not archive 



---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum