Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Nedd info

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

robertrv607(at)yahoo.com
Guest

Posted: Wed Dec 03, 2008 5:29 pm Post subject: Nedd info

Hi:



I need to buy one of the blocks I cannot remember the technical

name  Hw...something, the white material block, that holds the

cannopy down, on the rear sides, for slider..



I know I can order it from Vans, but you what the cost  will be...

I recently order a few bolts I needed, the total cost of the

items was  $11.80..the so called shipping and Handling  was almost

$10.00,,, a rip off..



Does any one knows where I can buy it,  besides Van's??



I never understand , how the shipping cost you more than the items

you buy....



Thanks for any info on this...

Bert



rv6a

dale1rv6(at)comcast.net
Guest

Posted: Wed Dec 03, 2008 5:46 pm Post subject: Nedd info

they should know better.. don't they ever read the instruction manual?

Robert



I have always said:  Ignorance and stupidity, are not the privilege,or

peopole on third world countries.  It is abounding in the USA, not only on

people with no highschool education, but in the upper ladder, even the

President of the US, has shown stupidity many times...



NO sense on trying to convince people, on something they already have

created in their minds to be true... is a waste of time.



robert



--

jabowenjr(at)hotmail.com
Guest

Posted: Wed Dec 03, 2008 6:09 pm Post subject: Nedd info

Isn't the purpose of this list to help as many builders as possible? The dissemination of information to those who request it. It's kind of what builds this little community of ours. I thought the only dumb question was the one not asked............

  

 Jim



  

 

[quote] From: dale1rv6(at)comcast.net

 To: rv-list(at)matronics.com

 Subject: RE: Nedd info

 Date: Wed C 3 Dec 2008 20:44:42 -0500

 

 --> RV-List message posted by: "Dale Walter" dale1rv6(at)comcast.net (dale1rv6(at)comcast.net) 

 

 --> RV-List message posted by: bert murillo <robertrv607(at)yahoo.com>

 

 they should know better. don't they ever read the instruction manual?

 Robert

 

 I have always said: Ignorance and stupidity C are not the privilege Cor

 peopole on third world countries. It is abounding in the USA C not only on

 people with no highschool education C but in the upper ladder C even the

 President of the US C has shown stupidity many times...

 

 NO sense on trying to convince people C on something they already have

 created in their minds to be true... is a waste of time.

 

 robert

 

 --

dale1rv6(at)comcast.net
Guest

Posted: Wed Dec 03, 2008 6:21 pm Post subject: Nedd info

Hi Jim,  

If you read carefully below you will see the comments are not mine. I agree with you. Below is a tongue in cheek; feeding Bert his own medicine.  

No hard feelings intended, only humor.  

Dale  

   

Happy Holidays to all  

   

Do not archive        

  

From: owner-rv-list-server(at)matronics.com [mailto:owner-rv-list-server(at)matronics.com] On Behalf Of JAMES BOWEN

 Sent: Wednesday, December 03, 2008 9:09 PM

 To: rv-list(at)matronics.com

 Subject: RE: Nedd info  

  

   

Isn't the purpose of this list to help as many builders as possible? The dissemination of information to those who request it. It's kind of what builds this little community of ours. I thought the only dumb question was the one not asked............

  

 Jim

 

  

 

 > From: dale1rv6(at)comcast.net

 > To: rv-list(at)matronics.com

 > Subject: RE: Nedd info

 > Date: Wed, 3 Dec 2008 20:44:42 -0500

 > 

 > --> RV-List message posted by: "Dale Walter" dale1rv6(at)comcast.net (dale1rv6(at)comcast.net) 

 > 

 > --> RV-List message posted by: bert murillo <robertrv607(at)yahoo.com>

 > 

 > they should know better.. don't they ever read the instruction manual?

 > Robert

 > 

 > I have always said: Ignorance and stupidity, are not the privilege,or

 > peopole on third world countries. It is abounding in the USA, not only on

 > people with no highschool education, but in the upper ladder, even the

 > President of the US, has shown stupidity many times...

 > 

 > NO sense on trying to convince people, on something they already have

 > created in their minds to be true... is a waste of time.

 > 

 > robert

 > 

 > --

krhooper(at)gmail.com
Guest

Posted: Wed Dec 03, 2008 6:29 pm Post subject: Nedd info

Bert, I think you are talking about UHMW, Ultra High Molecular Weight material.

 Here in Nashville I have found it at Nashville Rubber and Gasket. Maybe you have a similar supplier near you.

  

 Randy Hooper

 On Wed, Dec 3, 2008 at 7:26 PM, bert murillo <robertrv607(at)yahoo.com (robertrv607(at)yahoo.com)> wrote:

  	  Quote: 	
		  --> RV-List message posted by: bert murillo <robertrv607(at)yahoo.com (robertrv607(at)yahoo.com)>

 

Hi:



I need to buy one of the blocks I cannot remember the technical

name  Hw...something, the white material block, that holds the

cannopy down, on the rear sides, for slider..



I know I can order it from Vans, but you what the cost  will be...

 I recently order a few bolts I needed, the total cost of the

items was  $11.80..the so called shipping and Handling  was almost

$10.00,,, a rip off..



Does any one knows where I can buy it,  besides Van's??

 

	


-- 

Randy Hooper

  [quote][b]

jsflyrv(at)verizon.net
Guest

Posted: Wed Dec 03, 2008 6:35 pm Post subject: Nedd info

Good one Dale I like it,  if they read the instruction manual they 

would know what that little Hw.....something doo hicky was called.

do not archive

Dale Walter wrote:



[quote]






they should know better.. don't they ever read the instruction manual?

Robert



I have always said:  Ignorance and stupidity, are not the privilege,or

peopole on third world countries.  It is abounding in the USA, not only on

people with no highschool education, but in the upper ladder, even the

President of the US, has shown stupidity many times...



NO sense on trying to convince people, on something they already have

created in their minds to be true... is a waste of time.



robert



--

dan(at)rdan.com
Guest

Posted: Wed Dec 03, 2008 8:51 pm Post subject: Nedd info

they should know better.. don't they ever read the instruction manual?

 	  Quote: 	
		   By Robert

 These were comments directed to ME and my question regarding tubing flairs, I took them a being a "stupid question" something I should have know, or read about in the manual, I instantly went to the manual and yes,"Section 3, page 3-3 paragraph 6 does has a 31 word explanation that explains exactly what I asked , 
	


 So why do I pay for this forum?

 because I want to learn to build and fly my airplane,

 by the way what is "Nedd info"?

 The closest I could find in my dictionary is Neddy -- donkey !

  

 Dan, 

  

  

 



--- On Wed, 12/3/08, Dale Walter <dale1rv6(at)comcast.net> wrote:



 [quote]From: Dale Walter <dale1rv6(at)comcast.net>

Subject: RE: Nedd info

To: rv-list(at)matronics.com

Date: Wednesday, December 3, 2008, 6:20 PM



       

Hi Jim,

 

If you read carefully below you will see the comments are not mine. I agree with you. Below is a tongue in cheek; feeding Bert his own medicine.

 

No hard feelings intended, only humor.

 

Dale

 

 

 

Happy Holidays to all

 

 

 

Do not archive

    

 

From: owner-rv-list-server(at)matronics.com [mailto:owner-rv-list-server(at)matronics.com] On Behalf Of JAMES BOWEN

Sent: Wednesday, December 03, 2008 9:09 PM

To: rv-list(at)matronics.com

Subject: RE: Nedd info



 

 

 

Isn't the purpose of this list to help as many builders as possible? The dissemination of information to those who request it. It's kind of what builds this little community of ours. I thought the only dumb question was the one not asked............

 

Jim



 



[quote] From: dale1rv6(at)comcast.net

 To: rv-list(at)matronics.com

 Subject: RE: Nedd info

 Date: Wed, 3 Dec 2008 20:44:42 -0500

 

 --> RV-List message posted by: "Dale Walter" dale1rv6(at)comcast.net (dale1rv6(at)comcast.net) 

 

 --> RV-List message posted by: bert murillo <robertrv607(at)yahoo.com>

 

 they should know better.. don't they ever read the instruction manual?

 Robert

 

 I have always said: Ignorance  and stupidity, are not the privilege,or

 peopole on third world countries. It is abounding in the USA , not only on

 people with no highschool education, but in the upper ladder, even the

 President of the US , has shown stupidity many times...

 

 NO sense on trying to convince people, on something they already have

 created in their minds to be true... is a waste of time.

 

 robert

 

 --

Terry Watson

Joined: 09 Jan 2006
Posts: 290
Location: Seattle, WA USA

Posted: Wed Dec 03, 2008 9:22 pm Post subject: Nedd info

Dan,  

   

Don’t worry. Some people that know everything want to make sure you know that they know everything. But they don’t seem to know where the delete key is.  

   

Terry  

   

     

From: owner-rv-list-server(at)matronics.com [mailto:owner-rv-list-server(at)matronics.com] On Behalf Of dan(at)rdan.com

 Sent: Wednesday, December 03, 2008 8:51 PM

 To: rv-list(at)matronics.com

 Subject: RE: Nedd info  

  

              

they should know better.. don't they ever read the   instruction manual?

   > By Robert   

      

These were comments directed to ME and my   question regarding tubing flairs, I took them a being a "stupid   question" something I should have know, or read about in the manual, I   instantly went to the manual and yes,"Section 3, page 3-3 paragraph 6   does has a 31 word explanation that explains exactly what I asked ,    

      

So why do I pay for this forum?   

      

because I want to learn to build and fly my airplane,   

      

by the way what is "Nedd info"?   

      

The closest I could find in my dictionary is Neddy --   donkey !   

      

    

      

Dan,    

      

    

      

    

      



   

   --- On Wed, 12/3/08, Dale Walter <dale1rv6(at)comcast.net>   wrote:   

    	  Quote: 	
		     

From: Dale Walter   <dale1rv6(at)comcast.net>

   Subject: RE: Nedd info

   To: rv-list(at)matronics.com

   Date: Wednesday, December 3, 2008, 6:20 PM         

Hi Jim,   

   

If you   read carefully below you will see the comments are not mine. I agree with   you. Below is a tongue in cheek; feeding Bert his own medicine.   

   

No hard   feelings intended, only humor.   	
   

Dale   

    

Happy   Holidays to all   

    

Do not   archive            

   

From:   owner-rv-list-server(at)matronics.com   [mailto:owner-rv-list-server(at)matronics.com] On Behalf Of JAMES BOWEN

   Sent: Wednesday, December 03, 2008 9:09 PM

   To: rv-list(at)matronics.com

   Subject: RE: Nedd info   

   

    

Isn't the purpose   of this list to help as many builders as possible? The dissemination of   information to those who request it. It's kind of what builds this little   community of ours. I thought the only dumb question was the one not   asked............

    

   Jim

   

    

   

   > From: dale1rv6(at)comcast.net

   > To: rv-list(at)matronics.com

   > Subject: RE: Nedd info

   > Date: Wed, 3 Dec 2008 20:44:42 -0500

   > 

   > --> RV-List message posted by: "Dale Walter" dale1rv6(at)comcast.net (dale1rv6(at)comcast.net) 

   > 

   > --> RV-List message posted by: bert murillo   <robertrv607(at)yahoo.com>

   > 

   > they should know better.. don't they ever read the instruction manual?

   > Robert

   > 

   > I have always said: Ignorance and stupidity, are not the privilege,or

   > peopole on third world countries. It is abounding in the USA , not only   on

   > people with no highschool education, but in the upper ladder, even the

   > President of the US , has shown stupidity many times...

   > 

   > NO sense on trying to convince people, on something they already have

   > created in their minds to be true... is a waste of time.

   > 

   > robert

   > 

   > --

deene(at)austin.rr.com
Guest

Posted: Thu Dec 04, 2008 3:31 am Post subject: Nedd info

Avery tools sells this material (UHMW) in small blocks…  

   

Deene Ogden  

        [quote][b]

david.nelson(at)pobox.com
Guest

Posted: Thu Dec 04, 2008 6:28 am Post subject: Nedd info

Hi Bert,



I got my UHMW from a plastics distributor in town.  I stopped by and and they 

allowed me to poke around their scrap bin.



Regards,

 	 /\/elson



On Wed, 3 Dec 2008, bert murillo wrote:



 	  Quote: 	
		   



 Hi:



 I need to buy one of the blocks I cannot remember the technical

 name  Hw...something, the white material block, that holds the

 cannopy down, on the rear sides, for slider..



 I know I can order it from Vans, but you what the cost  will be...

 I recently order a few bolts I needed, the total cost of the

 items was  $11.80..the so called shipping and Handling  was almost

 $10.00,,, a rip off..



 Does any one knows where I can buy it,  besides Van's??



 I never understand , how the shipping cost you more than the items

 you buy....



 Thanks for any info on this...

 Bert



 rv6a

dan(at)rdan.com
Guest

Posted: Thu Dec 04, 2008 6:36 am Post subject: Nedd info

Tap plastics

 http://www.tapplastics.com/shop/category.php?bid=24

 has some HDPE (Rigid High-Density Polyethylene probably not the same stuff  as HUMW 

 but is is great to work with for making odd things, 

 I have a store near me and have used this on aviation 



--- On Thu, 12/4/08, Deene Ogden <deene(at)austin.rr.com> wrote:



  	  Quote: 	
		  From: Deene Ogden <deene(at)austin.rr.com>

Subject: Re: Nedd info

To: rv-list(at)matronics.com

Date: Thursday, December 4, 2008, 3:28 AM



       

Avery tools sells this material (UHMW) in small blocks…

 

 

 

Deene Ogden



 	  Quote: 	
		  



blank rel=nofollow>http://www.matronics.com/contribution

t=_blank rel=nofollow>http://www.matronics.com/Navigator?RV-List

=nofollow>http://forums.matronics.com

	


	
 [quote][b]

bifft(at)xmission.com
Guest

Posted: Thu Dec 04, 2008 7:54 am Post subject: Nedd info

On Thu, 4 Dec 2008, dan(at)rdan.com wrote:



 	  Quote: 	
		   Tap plastics

 http://www.tapplastics.com/shop/category.php?bid=24

 has some HDPE (Rigid High-Density Polyethylene probably not the same

 stuff  as HUMW

 but is is great to work with for making odd things,

 I have a store near me and have used this on aviation



  Another source of cheap, hard plastic is plastic cutting boards.  If you
	


find it on sale, can be quite cheap.

  Brian Huffaker, DSWL (bifft(at)xmission.com)

  RV-8A 80091  Fitting fuel vent lines.

  1/4 Starduster II N23UT flying

<pre><b><font size=2 color="#000000" face="courier new,courier">

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Thu Dec 04, 2008 8:54 am Post subject: Nedd info

Tap Plastics "Scrap & Remnant" bin sells for $0.50 per pound.  I visit occasionally and pick up lots of pieces that will do the job for pennies on the dollar. The bin's scraps are constantly changing.



John Cox



--

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum