|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
BobbyPaulk(at)COMCAST.NET Guest
|
Posted: Fri Dec 05, 2008 4:29 pm Post subject: Carb Gasket |
|
|
i had a failure of the carb gasket part no. 4691084 today. ( 3300 engine ) the one that attaches the carb to the engine.
the gasket split approximately two thirds around. it split on the side away from the throttle and choke cables. i was taxiing two days ago and the engine ran great. today it would not start. not even a pop. the gasket split in the middle between the two hose clamps. the engine has only 69 hrs. and barely a year and a half old. i ordered a replacement today from Jabiru USA. i also was concerned there was no reinforcing fabric in the rubber like the Lycoming or Continental intake tube rubber. what would happen if this occurred in flight?? would a piece of 2" reinforced hydraulic hose work better??
i would really like to know if anyone else had a failure of this part and at how many hours
i have photos if anyone wants to contact me off the list.
Bobby Paulk
601 XL
do not archive
| - The Matronics JabiruEngine-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?JabiruEngine-List |
|
|
|
Back to top |
|
|
aslsa.rng(at)gmail.com Guest
|
Posted: Fri Dec 05, 2008 10:02 pm Post subject: Carb Gasket |
|
|
Apparently the run of bad carb boots that hit Rotax and HKS got into the Jabiru inventory, too. I had to replace both mine on my HKS this spring with only a bit over 50 hours on them. Just put it on your list of things to check during your annual conditional inspection and fly on.
Rick
On Fri, Dec 5, 2008 at 6:28 PM, <BobbyPaulk(at)comcast.net (BobbyPaulk(at)comcast.net)> wrote:
[quote] --> JabiruEngine-List message posted by: BobbyPaulk(at)comcast.net (BobbyPaulk(at)comcast.net)
i had a failure of the carb gasket part no. 4691084 today. ( 3300 engine ) the one that attaches the carb to the engine.
the gasket split approximately two thirds around. it split on the side away from the throttle and choke cables. i was taxiing two days ago and the engine ran great. today it would not start. not even a pop. the gasket split in the middle between the two hose clamps. the engine has only 69 hrs. and barely a year and a half old. i ordered a replacement today from Jabiru USA. i also was concerned there was no reinforcing fabric in the rubber like the Lycoming or Continental intake tube rubber. what would happen if this occurred in flight?? would a piece of 2" reinforced hydraulic hose work better??
i would really like to know if anyone else had a failure of this part and at how many hours
i have photos if anyone wants to contact me off the list.
Bobby Paulk
601 XL
do not archive
[b]
| - The Matronics JabiruEngine-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?JabiruEngine-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|