Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Radio tray

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

naumuk(at)alltel.net
Guest

Posted: Wed Nov 26, 2008 5:46 pm Post subject: Radio tray

All-

     I'm getting ready to fabricate a  radio tray for my HDS (Which doesn't come with one stock) and figure  12" long before I run into my header tank. How wide are the ones that come  with XLs?

     Thanks.

 Bill Naumuk

Townville, Pa.

HDS 601MG/Corvair  95%

   [quote][b]

pdn8r(at)yahoo.com
Guest

Posted: Wed Nov 26, 2008 7:03 pm Post subject: Radio tray

It's 6 5/16ths  just right for a 6 1/4" radio stack.



Bill PaganEAA Tech Counselor #4395

--- On Wed, 11/26/08, Bill Naumuk <naumuk(at)alltel.net> wrote:

[quote]From: Bill Naumuk  <naumuk(at)alltel.net>

Subject: Radio tray

To: "zenith list" <zenith-list(at)matronics.com>

Date: Wednesday, November 26, 2008, 8:45 PM



       All-

     I'm getting ready to fabricate a  radio tray for my HDS (Which doesn't come with one stock) and figure  12" long before I run into my header tank. How wide are the ones that come  with XLs?

     Thanks.

 Bill Naumuk

Townville, Pa.

HDS 601MG/Corvair  95%

           [quote][b]

naumuk(at)alltel.net
Guest

Posted: Thu Nov 27, 2008 4:57 am Post subject: Radio tray

Thanks, Bill. Happy Thanksgiving.

                                                                              Bill

                                                      do not archive

 [quote]   ---

gfmjr_20(at)HOTMAIL.COM
Guest

Posted: Thu Nov 27, 2008 7:20 am Post subject: Radio tray

Bill--

I forget the exact dimensions on the XL consloe but I do know that it is not wide enough to fit radios and transponders. I ended up fabricating my own panel about 2 inches wider to accommodate an Icom 200 and a Garmin 327



George May

601XL 912s



From: naumuk(at)alltel.net

To: zenith-list(at)matronics.com

Subject: Zenith-List: Radio tray

Date: Wed C 26 Nov 2008 20:45:41 -0500



          All-

     I'm getting ready to fabricate a  radio tray for my HDS (Which doesn't come with one stock) and figure  12" long before I run into my header tank. How wide are the ones that come  with XLs?

     Thanks.

 Bill Naumuk

Townville C Pa.

HDS 601MG/Corvair  95%

    	  Quote: 	
		  



ww.matronics.com/contribution

 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List

onics.com
	


	
Windows Live Hotmail now works up to 70% faster. Sign up today.  [quote][b]

pdn8r(at)yahoo.com
Guest

Posted: Thu Nov 27, 2008 7:44 am Post subject: Radio tray

Hey George,

  

 What year/version is your plane?  Mine is a QBK I picked up in January 2008 and the transpnder/radio trays fit right in.



Bill PaganEAA Tech Counselor #4395

--- On Thu, 11/27/08, george may <gfmjr_20(at)hotmail.com> wrote:



  	  Quote: 	
		  From: george may <gfmjr_20(at)hotmail.com>

Subject: RE: Radio tray

To: "zenith list" <zenith-list(at)matronics.com>

Date: Thursday, November 27, 2008, 10:19 AM



   #yiv1877291055 .hmmessage P { margin:0px;padding:0px;} #yiv1877291055 { font-size:10pt;font-family:Verdana;}  Bill--

I forget the exact dimensions on the XL consloe but I do know that it is not wide enough to fit radios and transponders. I ended up fabricating my own panel about 2 inches wider to accommodate an Icom 200 and a Garmin 327



George May

601XL 912s



  From: naumuk(at)alltel.net

To: zenith-list(at)matronics.com

Subject: Radio tray

Date: Wed, 26 Nov 2008 20:45:41 -0500



    All-

     I'm getting ready to fabricate a radio tray for my HDS (Which doesn't come with one stock) and figure 12" long before I run into my header tank. How wide are the ones that come with XLs?

     Thanks.

 Bill Naumuk

Townville, Pa.

HDS 601MG/Corvair 95%

 	  Quote: 	
		  



ww.matronics.com/contribution

 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List

onics.com
	


	


  Windows Live Hotmail now works up to 70% faster. Sign up today.  	  Quote: 	
		  



	


	


         [quote][b]

gfmjr_20(at)HOTMAIL.COM
Guest

Posted: Thu Nov 27, 2008 2:22 pm Post subject: Radio tray

Bill-

Finished mine in 2006 and have 240 hours on it. Sounds like maybe they acted on some feedback.

George



Date: Thu C 27 Nov 2008 07:43:51 -0800

From: pdn8r(at)yahoo.com

Subject: RE: Radio tray

To: zenith-list(at)matronics.com



Hey George C

  

 What year/version is your plane?  Mine is a QBK I picked up in January 2008 and the transpnder/radio trays fit right in.



Bill PaganEAA Tech Counselor #4395

--- On Thu C 11/27/08 C george may <gfmjr_20(at)hotmail.com> wrote:



  	  Quote: 	
		  From: george may <gfmjr_20(at)hotmail.com>

Subject: RE: Radio tray

To: "zenith list" <zenith-list(at)matronics.com>

Date: Thursday C November 27 C 2008 C 10:19 AM



   .ExternalClass #EC_yiv1877291055 .EC_hmmessage P {padding:0px;} .ExternalClass #EC_yiv1877291055 {font-size:10pt;font-family:Verdana;}  Bill--

I forget the exact dimensions on the XL consloe but I do know that it is not wide enough to fit radios and transponders. I ended up fabricating my own panel about 2 inches wider to accommodate an Icom 200 and a Garmin 327



George May

601XL 912s



  From: naumuk(at)alltel.net

To: zenith-list(at)matronics.com

Subject: Zenith-List: Radio tray

Date: Wed C 26 Nov 2008 20:45:41 -0500



    All-

     I'm getting ready to fabricate a radio tray for my HDS (Which doesn't come with one stock) and figure 12" long before I run into my header tank. How wide are the ones that come with XLs?

     Thanks.

 Bill Naumuk

Townville C Pa.

HDS 601MG/Corvair 95%

 	  Quote: 	
		  



ww.matronics.com/contribution

 	  Quote: 	
		  http://www.matronics.com/Navigator?Zenith-List

onics.com
	


	


  Windows Live Hotmail now works up to 70% faster. Sign up today.  	  Quote: 	
		  



	


	


          	  Quote: 	
		  



3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

	
Color coding for safety: Windows Live Hotmail alerts you to suspicious email. Sign up today.  [quote][b]

larry(at)macsmachine.com
Guest

Posted: Sat Nov 29, 2008 8:10 am Post subject: Radio tray

Hi Bill,

The link below will guide you on size and install requirements for  the 

ICom A200

http://rv8.ch/files/Icom%20IC-A200%20Installation%20Instructions.pdf

http://www.macsmachine.com/images/electrical/full/encoder.gif

http://www.macsmachine.com/images/controllinkages/full/instpanelassy.gif

The second links are my tray and install for the radio and remote ACK 

encoder mount for the transponder.

Hope that helps,



Larry McFarland 601HDS at www.macsmachine.com



Bill Naumuk wrote:

All-

 	  Quote: 	
		       I'm getting ready to fabricate a radio tray for my HDS (Which 

 doesn't come with one stock) and figure 12" long before I run into my 

 header tank. How wide are the ones that come with XLs?

     Thanks.

 Bill Naumuk

 Townville, Pa.

 HDS 601MG/Corvair 95%

naumuk(at)alltel.net
Guest

Posted: Sat Nov 29, 2008 9:07 am Post subject: Radio tray

Larry-

    Although I still have to figure out where to put the remote compass and 

altitude encoder, first things first. I'm fishing the battery cables and 

tail section wiring up front. Incidentally, can you explain the (what seem 

to be) three solenoids in your site pictures? Two behind the seat and one on 

the front firewall?

    Many thanks to Jay Bannister for his assistance in routing the battery 

cables under the upper longerons. He went via the passenger side, I'm trying 

to go from the pilot side. 8 hours of research for every 10 minutes of 

actual work, but I'm it's sure worth it in the long run. I'll post pictures 

of the finished product if I don't shoot myself in frustration en route!

    Thanks.

                                                                             

            Bill

                                             do not archive

---

larry(at)macsmachine.com
Guest

Posted: Sat Nov 29, 2008 12:02 pm Post subject: Radio tray

Each battery connects by way of a separate switch that engages the fuse 

blocks. I have hot, main and essential blocks.

The contactor on the firewall is for the alternator should it be 

necessary to disconnect it as a runaway.



Larry McFarland

do not archive

Bill Naumuk wrote:

[quote] 



 Larry-

    Although I still have to figure out where to put the remote compass 

 and altitude encoder, first things first. I'm fishing the battery 

 cables and tail section wiring up front. Incidentally, can you explain 

 the (what seem to be) three solenoids in your site pictures? Two 

 behind the seat and one on the front firewall?

    Many thanks to Jay Bannister for his assistance in routing the 

 battery cables under the upper longerons. He went via the passenger 

 side, I'm trying to go from the pilot side. 8 hours of research for 

 every 10 minutes of actual work, but I'm it's sure worth it in the 

 long run. I'll post pictures of the finished product if I don't shoot 

 myself in frustration en route!

    Thanks.

                                                                             

            Bill

                                             do not archive

 ---

naumuk(at)alltel.net
Guest

Posted: Sat Nov 29, 2008 2:01 pm Post subject: Radio tray

Larry-

    Stupid me, redundant batteries.

                                                                    Bill

---

naumuk(at)alltel.net
Guest

Posted: Sat Dec 13, 2008 2:01 pm Post subject: Radio tray

All-

     Someone recently sent me a  picture of their step sided radio tray. Sad to say, I lost it. Please resend.  Thanks.

 Bill Naumuk

Townville, Pa.

HDS 601MG/Corvair  95%

   [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum