 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
john.marzulli(at)gmail.co
Guest
|
 Posted: Sat Dec 20, 2008 2:09 pm Post subject: Question: 7C1-5 hole placement and trimming. |
 |
|
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
 |
john.marzulli(at)gmail.co
Guest
|
|
| Back to top |
|
|
craig(at)craigandjean.com
Guest
|
| Posted: Sat Dec 20, 2008 9:50 pm Post subject: Question: 7C1-5 hole placement and trimming. |
|
|
I don’t have exact dimensions but I’ve attached pictures from three different sources. P1 and P2 are from the Zenith photo guide, P3 is of my plane and P4 is of George Race’s. Hope this helps.
-- Craig
From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of John Marzulli
Sent: Saturday, December 20, 2008 5:14 PM
To: zenith701801-list(at)matronics.com
Subject: Question: 7C1-5 hole placement and trimming.
The plans seem pretty vague on page 7C1. I was wondering how other people have placed the rivet holes in 7C1-5 and trimmed the piece.
First I guessed that to angle the piece that 30mm in on the sides seemed right with the holes 10mm in from each side. Further interpolation made me place the two holes 30mm out from the center. The big question is this: Are the four holes placed 10mm in from the edges?
Does this seem right?
Pic: http://marzulli.smugmug.com/photos/440095676_JBHav-X3.jpg
( Sorry for the repost, but it looks like my first message got mangled )
Thanks, ( and please archive the answer )
John Marzulli
http://www.GenevieveMarzulli.org/
http://marzulli.smugmug.com/
http://701Builder.blogspot.com/
http://www.JohnMarzulli.net/ | Quote: | | http://www.matronics.com/contribution |
01234567890123
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
| Filesize: |
163.8 KB |
| Viewed: |
290 Time(s) |
|
| Description: |
|
| Filesize: |
182.15 KB |
| Viewed: |
337 Time(s) |
|
| Description: |
|
| Filesize: |
154.24 KB |
| Viewed: |
316 Time(s) |
|
| Description: |
|
| Filesize: |
190.59 KB |
| Viewed: |
260 Time(s) |
|
|
|
| Back to top |
|
|
kmccune
Joined: 22 Sep 2007
Posts: 577
Location: Wisconsin, USA
|
| Posted: Sun Dec 21, 2008 3:54 am Post subject: Re: Question: 7C1-5 hole placement and trimming. |
|
|
I have not built that part yet, but from the way its drawn I'd say that the outboard rivets are a good safe edge distance in, with respect to 1C7-5 and the inboard ones are 30mm in and the same good safe edge distance from the edge for both 1C7-5 and 1C 7-4.
Kevin
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
“Always do what you are afraid to do.”
R.W. Emerson (1803-1882)
"Real freedom is the sustained act of being an individual." WW - 2009
"Life is a good deal...it's worth it" Feb 1969
Dorothy McCune
Last edited by kmccune on Sun Dec 21, 2008 6:34 pm; edited 1 time in total |
|
| Back to top |
|
|
john.marzulli(at)gmail.co
Guest
|
| Posted: Sun Dec 21, 2008 8:55 am Post subject: Question: 7C1-5 hole placement and trimming. |
|
|
Thanks Kevin!
PLEASE ARCHIVE
John Marzulli
http://www.GenevieveMarzulli.org/
http://marzulli.smugmug.com/
http://701Builder.blogspot.com/
http://www.JohnMarzulli.net/
On Sun, Dec 21, 2008 at 3:54 AM, kmccune <kmccune(at)somtel.net (kmccune(at)somtel.net)> wrote:
[quote] --> Zenith701801-List message posted by: "kmccune" <kmccune(at)somtel.net (kmccune(at)somtel.net)>
I have not built that part yet, but from the way its drawn I'd say that the outboard rivets are a good safe edge distance in, with respect to 1C7-5 and the inboard ones are 30mm in and the same good safe edge distance from the edge for both 1C7-5 and 1C 7-4.
do not archive
Kevin
--------
Mark Twain: Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.
Read this topic online here:
[url=http://forums.matronics.com/viewtopic.php?p 20382#220382]http://forums.matronics.com/viewtopic.php?p 20382#220382[/url]
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
