carlossa52(at)gmail.com Guest
|
Posted: Mon Dec 22, 2008 3:39 pm Post subject: Rivet puller problems (off-list) |
|
|
Harvey, this subject was discussed in the recent past - can't remember on which z-list, neither the outcome - but you should be able to find it with a search.
Good luck
Carlos
CH601-HD, plans
2008/12/22 Harvey Richards <lisa.richards(at)ns.sympatico.ca (lisa.richards(at)ns.sympatico.ca)>
[quote] --> Zenith701801-List message posted by: "Harvey Richards" <lisa.richards(at)ns.sympatico.ca (lisa.richards(at)ns.sympatico.ca)>
Would anyone have any ideas on the following hand rivet puller problems. About every 5th or so A5 rivet has a sharp stem protrusion a mm or so and some are breaking off with 10 mm or so protruding with the same sharp angle. I have disassembled and lightly lubricated and it still happens. A4 rivets pull ok. Thanks Do not archive
--------
CH 701
[b]
| - The Matronics Zenith701801-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|