Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

fuel drain valves

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List
View previous topic :: View next topic  
Author Message
Vic Baker



Joined: 11 Jan 2006
Posts: 71
Location: Carson City, Nevada

PostPosted: Wed Feb 04, 2009 8:06 am    Post subject: fuel drain valves Reply with quote

I recall seeing mention of viton (?) seals being used in wing and header tank fuel drain valves. I drain my tanks for aircraft transport after each flight and as a result the fuel drain valves in the wings remain dry between flights. Would like a longer term solution than the month or two the existing seals last.
Looking for a supplier and part number.
Thanks for any help.


Vic Baker
S7 912S Warp
Phase 1 flight testing
Carson City, Nv
[quote][b]


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Vic Baker
Series 7
Carson City, Nevada
Back to top
View user's profile Send private message Send e-mail
helili(at)chahtatushka.ne
Guest





PostPosted: Wed Feb 04, 2009 10:38 am    Post subject: fuel drain valves Reply with quote

Take one of your old “O” rings into a gasket/seal business and tell them you want Viton seals of the same size. I had to drive 170 miles one way to Oklahoma City to find a source for them. I bought 100 of them since they were about 6 cents each at the time. That was 18 months ago, so prices may have changed. I changed out the tank drains on 2 Cessna 172’s and my Kitfox, all of which use unleaded gas, right after I bought them, and they are still holding.

John Hart
KF IV, NSI Subaru
Wilburton, OK

From: owner-kitfox-list-server(at)matronics.com [mailto:owner-kitfox-list-server(at)matronics.com] On Behalf Of Vic Baker
Sent: Wednesday, February 04, 2009 10:03 AM
To: kitfox-list(at)matronics.com
Subject: fuel drain valves



I recall seeing mention of viton (?) seals being used in wing and header tank fuel drain valves. I drain my tanks for aircraft transport after each flight and as a result the fuel drain valves in the wings remain dry between flights. Would like a longer term solution than the month or two the existing seals last.

Looking for a supplier and part number.

Thanks for any help.





Vic Baker
S7 912S Warp
Phase 1 flight testing
Carson City, Nv
Quote:
http://www.matronics.com/Navigator?Kitfox-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
[quote][b]


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
pwmac(at)sisna.com
Guest





PostPosted: Wed Feb 04, 2009 5:29 pm    Post subject: fuel drain valves Reply with quote

S7 should have the latest drain valves with Viton. Amber colored is
correct. If you are not sure call the company and they will send new
o-rings at no cost. I forget the name of the company. sorry. The
header valve should have a touch of gas on it anyway. The drain
valves in the wings need to be replaced with a pipe plugs since they
serve no function and are just another failure point. The drain in
the header is plenty. That is where the bad stuff settles.
Paul
=========
At 08:03 AM 2/4/2009, you wrote:
Quote:
I recall seeing mention of viton (?) seals being used in wing and
header tank fuel drain valves. I drain my tanks for aircraft
transport after each flight and as a result the fuel drain valves in
the wings remain dry between flights. Would like a longer term
solution than the month or two the existing seals last.
Looking for a supplier and part number.
Thanks for any help.
Vic Baker
S7 912S Warp
Phase 1 flight testing
Carson City, Nv



- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group