Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Carby

Matronics Email Lists Forum Index -> JabiruEngine-List

View previous topic :: View next topic

Author Message

BobbyPaulk(at)COMCAST.NET
Guest

Posted: Wed Jan 14, 2009 7:18 am Post subject: Carby

List,

my carb was running VERY rich from off idle thru the whole range. i found the inlet needle seat had a burr on it when it was factory drilled that kept the rubber tipped needle valve from seating. i gently trimmed it with a larger drill bit ( hand held ) and polished the seat with a wooden dowel and valve grinding compound. this helped but i found out later that the older white floats were not strong enough to seat the needle or maybe they were misaligned. the newer black floats solved the problem. they are also Ethanol / alcohol tolerant. i was not using Ethanol based fuel. 



bobby

N131BP

DO NOT ARCHIVE.

- The Matronics JabiruEngine-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?JabiruEngine-List

Display posts from previous:

	Matronics Email Lists Forum Index -> JabiruEngine-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum