Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Older Doors

Matronics Email Lists Forum Index -> Zenith701801-List

View previous topic :: View next topic

Author Message

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Fri Jan 16, 2009 6:30 pm Post subject: Older Doors

I have a circa 2001 kit that I'm building.  It has the older flat side doors with metal sides and upper window.



I've seen a few doors like this that were "bubbled."  I was wondering if anyone had any plans or ideas about how to form a bubble door out of the older style?



I think Skyshop used to supply a door like this, but I understand they don't sell to zenith builders any longer.



Any comments/ideas appreciated.



Tommy Walker in Alabama.

twalker(at)cableone.net



Do Not Archive

_________________
Tommy Walker
N25A - Anniston, AL

infow(at)mts.net
Guest

Posted: Fri Jan 16, 2009 6:55 pm Post subject: Older Doors

Hey Tommy



Try this link off of Zenith web site... 

 http://www.zenithair.com/stolch701/data/7-F-19.pdf

This may be what you are looking for...



Ron

 





 I have a circa 2001 kit that I'm building.  It has the older flat

 side doors with metal sides and upper window.



 I've seen a few doors like this that were "bubbled."  I was

 wondering if anyone had any plans or ideas about how to form a

 bubble door out of the older style?



 I think Skyshop used to supply a door like this, but I understand

 they don't sell to zenith builders any longer.



 Any comments/ideas appreciated.



 Tommy Walker in Alabama.

 twalker(at)cableone.net



 Do Not Archive



 --------

 Tommy Walker

 N8701  -  Anniston, AL





 Read this topic online here:



 

http://forums.matronics.com/viewtopic.php?p 25211#225211







http://www.matronics.com/Navigator?Zenith701801-List

 =               - MATRONICS WEB FORUMS -

 your generous support!

 -> 

http://www.matronics.com/contribution

sonar1@cox.net

Joined: 02 Oct 2007
Posts: 55
Location: Santa Barbara, Ca

Posted: Fri Jan 16, 2009 11:48 pm Post subject: Re: Older Doors

Hi Tommy:

I would go ahead and get the new bubble doors. I was going to paint the bottom half of my bubble doors so they would look more like the other airplanes out there. I am so glad I didn't. Half the time, I am looking down through the bottom of the doors. Such great visibility. Can see so much more!

Expensive, but well worth it.



Fred Sanford  N9701  Santa Barbara Ca.

klondike(at)megalink.net
Guest

Posted: Sat Jan 17, 2009 8:35 am Post subject: Older Doors

Tommy



I had the "curved, lexan doors" in my 701----completed in 1997 (not the 

"new" bubble doors).  I loved the view with the full length Lexan doors.   I 

did have a "hinged window" in the upper part of the door.  The door window 

was about 6" wide and could be opened in flight.



At the time these window plans were available from Zenair.   The page is 

titled:  WINDOW OPTION, but does not have a number.



This feature was very nice of warm days.  It increased the ventilation, 

added elbow room.



Fritz



Do not archive



---

ggower_99(at)yahoo.com
Guest

Posted: Sun Jan 18, 2009 7:25 pm Post subject: Older Doors

Hello Tommy,

  

 We did that in our 701...  We got the idea then, from a photo in internet of a 701 from Shyshop,  we did not made any drawing or anything,  dont remeber very well but we just bent the middle tube and formed the doors over it.  No big mod, I think...   

  

 I remember first making a fake middle tube with "cheap" aluminum tube, we sit in the cabin and bent the tube to have about 1" tolerance over our arms, then checked if the lexan and the aluminum sheet suplied (previus to cut fit) will tolerate it.  Then worked from that.  The resulting cabin is plenty wide,  we have taken some pretty "wide" passengers without problem.

  

 Hope this helps.

  

 Saludos

 Gary Gower.

 Flying from Chapala, Mexico.  

 Yesterday was kind of cold. Temp was 75F.  wind calm few clouds great afternoon flight.

  

  



--- On Fri, 1/16/09, Tommy Walker <twalker(at)cableone.net> wrote:



  	  Quote: 	
		  From: Tommy Walker <twalker(at)cableone.net>

Subject: Older Doors

To: zenith701801-list(at)matronics.com

Date: Friday, January 16, 2009, 9:30 PM



 	  Quote: 	
		  --> Zenith701801-List message posted by: "Tommy Walker"

<twalker(at)cableone.net>



I have a circa 2001 kit that I'm building.  It has the older flat side

doors with metal sides and upper window.



I've seen a few doors like this that were "bubbled."  I was

wondering if anyone had any plans or ideas about how to form a bubble door out

of the older style?



I think Skyshop used to supply a door like this, but I understand they

don't sell to zenith builders any longer.



Any comments/ideas appreciated.



Tommy Walker in Alabama.

twalker(at)cableone.net



Do Not Archive



--------

Tommy Walker

N8701  -  Anniston, AL





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p 25211#225211



	
	


           [quote][b]

kmccune

Joined: 22 Sep 2007
Posts: 577
Location: Wisconsin, USA

Posted: Mon Jan 19, 2009 4:23 am Post subject: Re: Older Doors

Hi Tommy,



I found this through the wayback internet archives, it is a sample from the late 90s Zenith website.

Kevin

bubbled stadard door 7-F-19.pdf

Description:

Download

Filename:

bubbled stadard door 7-F-19.pdf

Filesize:

101.31 KB

Downloaded:

393 Time(s)

_________________
“Always do what you are afraid to do.”
R.W. Emerson (1803-1882)

"Real freedom is the sustained act of being an individual." WW - 2009

"Life is a good deal...it's worth it" Feb 1969
Dorothy McCune

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Mon Jan 19, 2009 8:41 am Post subject: Re: Older Doors

I have to say that I get a lot more out of this list than I contribute.



Thanks to all.



Tommy Walker in Alabama



50% done

_________________
Tommy Walker
N25A - Anniston, AL

bobkat

Joined: 07 Sep 2008
Posts: 143
Location: Bismarck, ND

Posted: Mon Jan 19, 2009 9:03 am Post subject: Older Doors

M too, Tommy!  I wish I'd found out about it a2 or 3 years ago. Would have 

saved me lots of mistakes and redoes.  Even now I'm leaning all kids of good 

things from all you guys!

---

ken Buchmann

Joined: 18 Feb 2008
Posts: 6
Location: New Haven,MO

Posted: Tue Jan 20, 2009 8:53 am Post subject: older doors

I have a czaw 701 and am in the process of updating  to the latest Zenith Bubble doors. I have available a pair of czaw original  doors and a pair of Dannys Skyshop bubble doors. The wife says get rid of the  superfluous doors or modify the 701 to a six door version. Contact me if  interested.

  

 Ken

 do not archive

   [quote][b]

kmccune

Joined: 22 Sep 2007
Posts: 577
Location: Wisconsin, USA

Posted: Wed Jan 21, 2009 3:39 pm Post subject: Re: Older Doors

Ok,  here is my version of the old style door.

Maybe ugly but I don't like the totally clear bottom on the bubble ones, And this could allow for a sliding window and an elbow rest.



Kevin

Storch type door window.JPG

Description:

Filesize:

99.03 KB

Viewed:

524 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith701801-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum