Matronics Email Lists :: View topic - Will other wiring interfere with Magnetometer?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Will other wiring interfere with Magnetometer?

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

Allen Fulmer

Joined: 10 Jan 2006
Posts: 79
Location: Alexander City, AL

Posted: Thu Jan 22, 2009 2:48 pm Post subject: Will other wiring interfere with Magnetometer?

Getting ready to pull a twisted pair from panel to position lights in tips.

I was measuring for how long to cut the wires and I had a couple of

questions:



Does the pair of wires feeding each nav light need to be twisted the entire

length from panel to light or just some distance before and after as it

passes the magnetometer?



And since my leading edge landing/taxi lights (located several feet inboard)

will be grounded locally can I shorten the length of the nav light ground

wire and ground to the airframe at the same place?  And then twist from

there to the nav light?



Thanks,



Allen Fulmer

[quote]>>--

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
RV7 QB Fuselage
Eggenfellner H6 on orde
N808AF reserved
Alexander City, AL

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum