 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jakecrause(at)yahoo.com
Guest
|
 Posted: Wed Jan 14, 2009 4:16 pm Post subject: LED Position Lights |
 |
|
Has anyone had good luck with an LED alternate to the the Zenith lighting kit? Whether you created your own or bought an off the shelf product I'd be interested to hear about it.
My 801 tail kit has not arrived yet so I don't have the plans. Where did you guys run the wires through the Rudder? Did you use grommets or another method? I'm thinking I could drill the holes and then run the wire or a string as I build the rudder and then complete the lighting at a later date.
Thanks in advance.
Jake
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
 |
kenryan(at)alaska.net
Guest
|
| Posted: Wed Jan 14, 2009 5:11 pm Post subject: LED Position Lights |
|
|
Zenith is offering an LED option from AVEO.
This is what is on the yellow factory 750 and Roger likes them very much.
http://www.aveoaviationlights.com/technology/index.php
On Wed, Jan 14, 2009 at 3:14 PM, Jake Crause <jakecrause(at)yahoo.com (jakecrause(at)yahoo.com)> wrote:
[quote] Has anyone had good luck with an LED alternate to the the Zenith lighting kit? Whether you created your own or bought an off the shelf product I'd be interested to hear about it.
My 801 tail kit has not arrived yet so I don't have the plans. Where did you guys run the wires through the Rudder? Did you use grommets or another method? I'm thinking I could drill the holes and then run the wire or a string as I build the rudder and then complete the lighting at a later date.
Thanks in advance.
Jake
| Quote: |
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
| Quote: |
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
jakecrause(at)yahoo.com
Guest
|
| Posted: Wed Jan 14, 2009 6:32 pm Post subject: LED Position Lights |
|
|
Thanks Ken, I'll take a look at those lights.
I just found the Tail Kit assembly manual on the Zenith website. On the exploded view it appears like the holes for the wires are pre-drilled. Does anyone know the gauge of the wire the Zenith tail light uses? Thanks.
Jake
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
bootless(at)earthlink.net
Guest
|
| Posted: Wed Jan 14, 2009 6:37 pm Post subject: LED Position Lights |
|
|
Hi Jake,
Have you seen the LED combination wingtip position light/strobes by Aveo Engineering? Slick! They draw almost no current, and are incredibly visible.
best,
Cory
Jake Crause wrote: [quote] Has anyone had good luck with an LED alternate to the the Zenith lighting kit? Whether you created your own or bought an off the shelf product I'd be interested to hear about it.
My 801 tail kit has not arrived yet so I don't have the plans. Where did you guys run the wires through the Rudder? Did you use grommets or another method? I'm thinking I could drill the holes and then run the wire or a string as I build the rudder and then complete the lighting at a later date.
Thanks in advance.
Jake
| Quote: |
href="3D%22http://www.matronics.com/Navigator?Zenith701801-List%22">http://www.matronics.com/Navigator?Zenith701801-List
href="3D%22http://forums.matronics.com%22">http://forums.matronics.com
href="3D%22http://www.matronics.com/contribution%22">http://www.matronics.com/contribution
|
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
samhord2(at)gmail.com
Guest
|
| Posted: Thu Jan 15, 2009 10:07 am Post subject: led position lights |
|
|
Ken:
Try www.KEsrobes.com (Kunzlman Electronics) His lights are very lite and draw very little power.
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
mark.kershaw(at)oserian.c
Guest
|
| Posted: Mon Jan 19, 2009 3:54 am Post subject: LED Position Lights |
|
|
Good afternoon Jake, I am just busy attaching mine to the rudder skin, the wire is 16 guage. It comes in rolled in a 6ft length which needs to be cut in half.
Regards
Mark Kershaw
18 hours and creeping up.
From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of Jake Crause
Sent: Thursday, January 15, 2009 5:30 AM
To: zenith701801-list(at)matronics.com
Subject: Re: LED Position Lights
Thanks Ken, I'll take a look at those lights.
I just found the Tail Kit assembly manual on the Zenith website. On the exploded view it appears like the holes for the wires are pre-drilled. Does anyone know the gauge of the wire the Zenith tail light uses? Thanks.
Jake
01234567890123
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
jakecrause(at)yahoo.com
Guest
|
| Posted: Mon Jan 19, 2009 12:22 pm Post subject: LED Position Lights |
|
|
Thanks Mark, It's very much appreciated.
Jake
Mark Wrote:
Good afternoon Jake, I am just busy attaching mine to the rudder skin, the wire is 16 guage. It comes in rolled in a 6ft length which needs to be cut in half.
Regards
Mark Kershaw
18 hours and creeping up.
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
