Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

My new Canopy/Wing covers! Pictures.

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List
View previous topic :: View next topic  
Author Message
815TL



Joined: 10 Oct 2008
Posts: 62

PostPosted: Thu Jan 22, 2009 9:37 am    Post subject: My new Canopy/Wing covers! Pictures. Reply with quote

Hi guys, I thought I would pass along some pictures of the new canopy and wing covers for my Kitfox II.
Here is the best part, hang on to your hats. I made them. That's right, I pulled the wives sewing machine out, and had her show me how to use it. Bought all the fabric, the strapping, and the buckles. It took me about 15 hours or so of work on it. I decided to go with a cotton fabric, similar to canvas, then waterproofed it with silicone spray. If I had it to do over I might have chosen a nylon, but it was much more expensive, and I did not know how it would turn out.

The canopy cover, covers the windshiled, up over the top, and down over the turtle deck. Side pannels wrap around the doors, and connect to the back part near the turtle deck. Four 1" straps hold it in place, probably could have used three though. When i cut it, I made it a little big, so it leaves about 2" of the side windows exposed rught under the wing. Not a big deal, as they are right under the wing.

The wing covers are held on by seven 1" straps. I tried with 4 straps on each, but it was not enough. Tee covers come down over the leading edge about 4", and completely cover the flaperon in the back.

So, if anyone needs a set of wing covers or canopy cover for a Kitfox II made up, just let me know. I have apretty good pattern now, and am getting good with the sewing machine. I could probably rip off a set in about 5 hours or so.

Let me know what you all think.

Andrew
815TL, Kitfox II, Rotax 582-C


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List



PICT0071.JPG
 Description:
 Filesize:  698.26 KB
 Viewed:  187 Time(s)

PICT0071.JPG



PICT0070.JPG
 Description:
 Filesize:  694.46 KB
 Viewed:  186 Time(s)

PICT0070.JPG



PICT0069.JPG
 Description:
 Filesize:  695.87 KB
 Viewed:  185 Time(s)

PICT0069.JPG



PICT0068.JPG
 Description:
 Filesize:  702.01 KB
 Viewed:  191 Time(s)

PICT0068.JPG



PICT0067.JPG
 Description:
 Filesize:  698.22 KB
 Viewed:  181 Time(s)

PICT0067.JPG



PICT0066.JPG
 Description:
 Filesize:  711.11 KB
 Viewed:  188 Time(s)

PICT0066.JPG



PICT0065.JPG
 Description:
 Filesize:  757.5 KB
 Viewed:  203 Time(s)

PICT0065.JPG



PICT0064.JPG
 Description:
 Filesize:  753.8 KB
 Viewed:  200 Time(s)

PICT0064.JPG


Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group