b.carl@sympatico.ca
Joined: 20 May 2008 Posts: 77
|
Posted: Mon Feb 02, 2009 1:39 pm Post subject: Zenith701801-List: Re: Zenith701801-List: Rép. : Zenith70180 |
|
|
I have a 70" 3 blade WD on 912ul/701. I find it's a good combination needing 8-12' of pitch depending on desired performance. As discussed I found the tips were too close to the ground so I added a 4" plug between the nose fork and the strut. Works fine and also reduces the height of the tail to clear the top of doors.
Carl
[quote]
Quote: | From: Jean-Paul Roy <royjp(at)yahoo.ca>
Subject: Rép. : Warp drive prop length???
To: zenith701801-list(at)matronics.com
Date: Friday, January 30, 2009, 12:49 PM
Quote: | Doug, when I went and tried the 701 in Kitchener (Tom Mills ??) 3 years ago, he had a 72" warp drive prop on it (wheels). I noticed he was very carefull not to travel on the grass since it had a couple inches of snow on the ground.
I visited another one in the Montreal area, the man had a 701 on a grass strip. He also had a 72" and I recall seeing some grass stains on the tip of the blades.
From then on, my decision was made not to exceed 70" if on wheels or skis. Of course being on floats does not pause this problem as you have much more clearance.
Just my opinion
Jean-Paul Roy
--- En date de : Ven, 30.1.09, MacDonald Doug <dougsnash(at)yahoo.com> a écrit :
Quote: | Quote: | What">dougsnash(at)yahoo.com>
What length Warp drive prop is used on the 701/912 UL? I've looked in my
information and have not found the prop length listed anywhere(could just be me
being dense). I'm pretty much ready to order my prop but want to get the
right length blades.
Doug MacDonald
CH-701 Scratch Builder
NW Ontario, Canada
|
|
|
|
[b]
| - The Matronics Zenith701801-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|