Matronics Email Lists :: View topic - Drilling Mid and tailcone Longerons

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Drilling Mid and tailcone Longerons

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Y-it

Joined: 27 Jan 2009
Posts: 4

Posted: Mon Feb 16, 2009 3:48 pm Post subject: Drilling Mid and tailcone Longerons

Hello all,

I've got my tailcone temporarily attached to the fuse (awesome to see it come together), the mid fuse longerons do not have the bolt holes in the aft marked for match drilling to the tailcone longeron.  I'm guessing since this was a QB kit thats the reason I don't have the template to actually make the longerons. I've combed through the plans and I can't find any reference for bolt spacing. Any help in this area would be helpful, of course Vans is closed today ;(

Thank!

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

egohr1

Joined: 17 Jan 2006
Posts: 38
Location: Oklahoma City

Posted: Mon Feb 16, 2009 4:51 pm Post subject: Re: Drilling Mid and tailcone Longerons

4 bolts 3/4" on center start 3/8 from the end to the center of the first hole

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
eric gohr
EGOHR86@alumni.carnegiemellon.edu

n223rv(at)wolflakeairport
Guest

Posted: Mon Feb 16, 2009 7:38 pm Post subject: Drilling Mid and tailcone Longerons

Plans page 32-3



Sent from my iPhone



On Feb 16, 2009, at 6:48 PM, "Y-it" <wyattwest(at)sbcglobal.net> wrote:



 	  Quote: 	
		   



 Hello all,

 I've got my tailcone temporarily attached to the fuse (awesome to  

 see it come together), the mid fuse longerons do not have the bolt  

 holes in the aft marked for match drilling to the tailcone  

 longeron.  I'm guessing since this was a QB kit thats the reason I  

 don't have the template to actually make the longerons. I've combed  

 through the plans and I can't find any reference for bolt spacing.  

 Any help in this area would be helpful, of course Vans is closed  

 today ;(

 Thank!





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 30580#230580

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Y-it

Joined: 27 Jan 2009
Posts: 4

Posted: Mon Feb 16, 2009 9:23 pm Post subject: Re: Drilling Mid and tailcone Longerons

 	  n223rv(at)wolflakeairport wrote: 	
		  Plans page 32-3



Sent from my iPhone



On Feb 16, 2009, at 6:48 PM, "Y-it" <wyattwest> wrote:



 	  Quote: 	
		   



 Hello all,

 I've got my tailcone temporarily attached to the fuse (awesome to  

 see it come together), the mid fuse longerons do not have the bolt  

 holes in the aft marked for match drilling to the tailcone  

 longeron.  I'm guessing since this was a QB kit thats the reason I  

 don't have the template to actually make the longerons. I've combed  

 through the plans and I can't find any reference for bolt spacing.  

 Any help in this area would be helpful, of course Vans is closed  

 today ;(

 Thank!





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p 30580#230580





	
	




Page 32-3 on my plans don't show any detail for measurements, and I don't seem to have the template for the longerons.  

I got called in for baby duty anyhow, so It didn't

 turn out to be a big letdown in the end! (Well from a plane building standpoint I guess it did)

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum