Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Trim Tab modifications / need opinions / To Nick O.

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Lightning-List
View previous topic :: View next topic  
Author Message
cdewey6969(at)yahoo.com
Guest





PostPosted: Mon Feb 23, 2009 3:12 pm    Post subject: Trim Tab modifications / need opinions / To Nick O. Reply with quote

Nick,
I just forwarded to you the detailed proposal from Austin (before he talked to his inspectors) on info(at)flylightning.net. I was really excited to get this problem fixed and get the plane in the air and then I got hit with this bad news.
If the other parts (in the email I sent you) he proposes are needed, can you order them and send them to him and I of course will pay you for the parts?
I really want Austin to finish the job because Jim Lanning is ready to fly the hours off in Hagerstown and it would be a major headache at this point to take the plane elsewhere and find a new test pilot and a new repair facility, not to mention the hassle of moving the plane to a new facility. Can you talk to Austin about this? I could even sign a release of liability if necessary- anything to just finish this project up at this point. Thanks,
Charles

--- On Mon, 2/23/09, flylightning <info(at)flylightning.net> wrote:

[quote] From: flylightning <info(at)flylightning.net>
Subject: RE: Trim Tab modifications / need opinions
To: lightning-list(at)matronics.com
Date: Monday, February 23, 2009, 5:29 PM

"flylightning" <info(at)flylightning.net>

Charles,

I would assume that you are taking the roll out using flap
differential? If
you have to adjust the flaps more than say 1/8"
different from each other
than I would suggest putting a small fixed tab say 1"
by about 6" on one of
the ailerons. This is no different than seen on Cessna or
cirrus or
Columbia. A small aluminum tab that can be adjusted by a
slight bend will
fly the aileron in correct direction, this will be more
effective and will
not cause a large difference in the flaps during stalls. If
they need me to
send them direction on how to do it, or the piece of
aluminum and call it
from the factory I can.

Nick Otterback
Arion Aircraft, LLC

--


- The Matronics Lightning-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Lightning-List
Back to top
info(at)flylightning.net
Guest





PostPosted: Mon Feb 23, 2009 3:29 pm    Post subject: Trim Tab modifications / need opinions / To Nick O. Reply with quote

Charles,

I just forwarded my response to Austin to you also. If he needs any of these
items in a "kit" than we can package it that way. What ever you need to help
get your bird going we can help.

Nick

--


- The Matronics Lightning-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Lightning-List
Back to top
cdewey6969(at)yahoo.com
Guest





PostPosted: Mon Feb 23, 2009 3:46 pm    Post subject: Trim Tab modifications / need opinions / To Nick O. Reply with quote

Thanks Nick. Charles
--- On Mon, 2/23/09, flylightning <info(at)flylightning.net> wrote:

[quote] From: flylightning <info(at)flylightning.net>
Subject: RE: Trim Tab modifications / need opinions / To Nick O.
To: lightning-list(at)matronics.com
Date: Monday, February 23, 2009, 6:23 PM

"flylightning" <info(at)flylightning.net>

Charles,

I just forwarded my response to Austin to you also. If he
needs any of these
items in a "kit" than we can package it that way.
What ever you need to help
get your bird going we can help.

Nick

--


- The Matronics Lightning-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Lightning-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Lightning-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group