Matronics Email Lists :: View topic - Hendricks door handles

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Hendricks door handles

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

fltsend(at)juno.com
Guest

Posted: Tue Feb 24, 2009 7:48 pm Post subject: Hendricks door handles

Hello gang,

        Any ideas as to the best process of installation for a Hendrick

door handle and necessary parts that must be conditioned to make it work

on a rv10?   I believe this subject was covered before but cannot find. 

Thanks.  R. J. Reno

____________________________________________________________

Looking for insurance? Compare and save today. Click here.

http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTInoKDVgmaNNwEIDfk1cXkSQYRAu1i98rnKjWFruNwqMUtoFexM4I/

rvreynolds(at)macs.net
Guest

Posted: Wed Feb 25, 2009 3:04 am Post subject: Hendricks door handles

I am working through this right now. I should have pictures this  

weekend,



Richard Reynolds



On Feb 24, 2009, at 10:45 PM, Bob Reno wrote:



 	  Quote: 	
		   



 Hello gang,

         Any ideas as to the best process of installation for a  

 Hendrick

 door handle and necessary parts that must be conditioned to make it  

 work

 on a rv10?   I believe this subject was covered before but cannot  

 find.

 Thanks.  R. J. Reno

 ____________________________________________________________

 Looking for insurance? Compare and save today. Click here.

 http://thirdpartyoffers.juno.com/TGL2141/fc/ 

 BLSrjpTInoKDVgmaNNwEIDfk1cXkSQYRAu1i98rnKjWFruNwqMUtoFexM4I/

rnewman(at)tcwtech.com
Guest

Posted: Wed Feb 25, 2009 4:06 am Post subject: Hendricks door handles

Here's a link to my web album.    I have installed the Hendricks door locks. 

This webalbum is called Fiberglass work, the door handle install and part 

fabrication is in there.



http://picasaweb.google.com/rcnewman64/FiberglassWork#



Bob Newman

TCW Technologies, LLC

www.tcwtech.com



---

robin1(at)mrmoisture.com
Guest

Posted: Wed Feb 25, 2009 8:44 am Post subject: Hendricks door handles

Bob,

	That is a beautiful shop you have. Any chance I can move in once

your -10 is complete? Oh, nice photo documentation too!



Robin

Do Not Archive



--

rnewman(at)tcwtech.com
Guest

Posted: Wed Feb 25, 2009 9:43 am Post subject: Hendricks door handles

RV builders are always welcome at my shop!



Thanks,

Bob

Do Not Archive





---

robin1(at)mrmoisture.com
Guest

Posted: Wed Feb 25, 2009 10:02 am Post subject: Hendricks door handles

Welcome and "move in" are two different things... but thanks.



R



--

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Wed Feb 25, 2009 10:53 am Post subject: Hendricks door handles

Bob, if our Rv-10 is not done and the offer stands;  Is flying into

Reading (commercially) the best bet?  Yourself, Deems and Greg Hale have

done a tremendous service on showing the quality that is available to a

kitbuilder willing to conquer composite fabrication.   And to think

people still call VAN's a metal RV-10.



John Cox



--

johngoodman

Joined: 18 Sep 2006
Posts: 530
Location: GA

Posted: Wed Feb 25, 2009 2:02 pm Post subject: Re: Hendricks door handles

Wait a minute, Bob. Is that a pair of Crocs you're wearing in photo number 100?

_________________
#40572 Phase One complete in 2011

rnewman(at)tcwtech.com
Guest

Posted: Wed Feb 25, 2009 3:15 pm Post subject: Hendricks door handles

John,   You, as well as other RV builders are welcome at my shop anytime. 

For those that fly themselves in,  Queen City Airport (KXLL) is by far the 

best.  For commercial flights KABE  Allentown, PA is the best.    (Reading 

is rather far away)



Bob Newman

Do Not Archive



---

rnewman(at)tcwtech.com
Guest

Posted: Wed Feb 25, 2009 6:06 pm Post subject: Hendricks door handles

Why Yes they are!,   good eye.   As a Dad with two teenage daughters, I do 

everything possible to embarrass them,  I'm constantly making them just 

shake their heads.   If it was the right time of year, I'd probably be 

wearing shorts, socks, and Crocks just in case they bring some friends by! 

(however,they still can't resist showing their friends what their Dad is 

building in his workshop 



Fashion free,

Bob



Do Not Archive

---

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum