Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Another Milestone

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
Deems Davis



Joined: 09 Jan 2006
Posts: 925

PostPosted: Fri Mar 06, 2009 5:34 pm    Post subject: Another Milestone Reply with quote

Well today marked another pretty big milestone for me. Gary Towner (DAR)
drove down from Overgaard today, and performed an inspection of N519PJ.
Gary had all of the parperwork ready, except for the affidavit, that I
had to have notarized, and we began by completing the required forms.
Made appropriate entry in my (new) Airframe log book, and then we moved
to the inspection. Gary's primary focus and concern was the flight
controls. we began inside of the cockpit, and then proceeded outside to
all of the flight surfaces and connections. His next stop was the
firewall forward area. I pointed out to him one item I noticed
yesterday, where I hadn't sealed (RTV) a firewall passthrough. Gary
spent about 1 1/2 hours on the inspection, and didn't note any squawks.
We moved back to finalize the A/W certificate, and went through the Ops
Limitations. Gary gave me a REALLY big Phase 1 test area. Essentially
DVT to Kingman, to Laughlin (Colorado River) down the river to Parker
then SouthEast all the way to Casa Grande, then back west of PHX
(Goodyear, Glendale) and back to DVT. Gary helped walk me through the
repairmans cert application, and then handed me the A/W cert and the Ops
Lim and made the official entry in the Airframe logbook.
1st flight will occur as soon as the FAA sends my medical. My AME said
to expect May1 :'(

http://deemsrv10.com/album/Final%20Assembly/slides/DSC07403.html
Deems Davis # 406
'Its all done............ period!
http://deemsrv10.com/


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
dmaib@me.com



Joined: 25 Apr 2006
Posts: 455
Location: New Smyrna Beach, Florida

PostPosted: Fri Mar 06, 2009 5:43 pm    Post subject: Another Milestone Reply with quote

Congratulations Deems! Great news! Now if OKC will just move along
smartly for you............................

David Maib

On Mar 6, 2009, at 8:29 PM, Deems Davis wrote:



Well today marked another pretty big milestone for me. Gary Towner
(DAR) drove down from Overgaard today, and performed an inspection of
N519PJ. Gary had all of the parperwork ready, except for the
affidavit, that I had to have notarized, and we began by completing
the required forms. Made appropriate entry in my (new) Airframe log
book, and then we moved to the inspection. Gary's primary focus and
concern was the flight controls. we began inside of the cockpit, and
then proceeded outside to all of the flight surfaces and connections.
His next stop was the firewall forward area. I pointed out to him one
item I noticed yesterday, where I hadn't sealed (RTV) a firewall
passthrough. Gary spent about 1 1/2 hours on the inspection, and
didn't note any squawks. We moved back to finalize the A/W
certificate, and went through the Ops Limitations. Gary gave me a
REALLY big Phase 1 test area. Essentially DVT to Kingman, to Laughlin
(Colorado River) down the river to Parker then SouthEast all the way
to Casa Grande, then back west of PHX (Goodyear, Glendale) and back
to DVT. Gary helped walk me through the repairmans cert application,
and then handed me the A/W cert and the Ops Lim and made the official
entry in the Airframe logbook.
1st flight will occur as soon as the FAA sends my medical. My AME
said to expect May1 :'(

http://deemsrv10.com/album/Final%20Assembly/slides/DSC07403.html
Deems Davis # 406
'Its all done............ period!
http://deemsrv10.com/


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
David Maib
RV-10 #40559
New Smyrna Beach, FL
Back to top
View user's profile Send private message
bgill1(at)charter.net
Guest





PostPosted: Fri Mar 06, 2009 6:35 pm    Post subject: Another Milestone Reply with quote

Congrats Deems...

Many of us have been following along with the build and very excited for
you - Keep it up!

Byron
N253RV assigned - Just need to get it all finished!

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
gipsowh(at)hotmail.com
Guest





PostPosted: Fri Mar 06, 2009 6:35 pm    Post subject: Another Milestone Reply with quote

Deems C congrats on your passing the DAR inspection.  I went thru the same exercise 3 weeks ago.  Passed without any real squawks.  I too have a medical issue with OKC and am waiting on their approval.  My AME was a jerk about my medical this time C so he shipped it to OKC without even telling me.  I have a BP problem according to him.  This was in November and I've lost nearly 25 lbs since and my blood pressure is down below FAA maximums.  I've jumped thru hoops with my internist since then and now am waiting for FAA approval on my medical.  Bud Warren has been my test pilot for N730WL.  He flew the first flight last week.  And I can't wait to fly my LS1 powered RV10.  Hope to meet you soon at Oshkosh??
 
Regards C
 
Bill Gipson
N730WL
 
Quote:
Date: Fri C 6 Mar 2009 18:29:48 -0700
From: deemsdavis(at)cox.net
To: rv10-list(at)matronics.com
Subject: Another Milestone

--> RV10-List message posted by: Deems Davis <deemsdavis(at)cox.net>

Well today marked another pretty big milestone for me. Gary Towner (DAR)
drove down from Overgaard today C and performed an inspection of N519PJ.
Gary had all of the parperwork ready C except for the affidavit C that I
had to have notarized C and we began by completing the required forms.
Made appropriate entry in my (new) Airframe log book C and then we moved
to the inspection. Gary's primary focus and concern was the flight
controls. we began inside of the cockpit C and then proceeded outside to
all of the flight surfaces and connections. His next stop was the
firewall forward area. I pointed out to him one item I noticed
yesterday C where I hadn't sealed (RTV) a firewall passthrough. Gary
spent about 1 1/2 hours on the inspection C and didn't note any squawks.
We moved back to finalize the A/W certificate C and went through the Ops
Limitations. Gary gave me a REALLY big Phase 1 test area. Essentially
DVT to Kingman C to Laughlin (Colorado River) down the river to Parker
then SouthEast all the way to Casa Grande C then back west of PHX
(Goodyear C Glendale) and back to DVT. Gary helped walk me through the
repairmans cert application C and then handed me the A/W cert and the Ops
Lim and made the official entry in the Airframe logbook.
1st flight will occur as soon as the FAA sends my medical. My AME said
to expect May1 :'(

http://deemsrv10.com/album/Final%20Assembly/slides/DSC07403.html


Deems Davis # 406
'Its all done............ period!
http://deemsrv10.com/
&==============

[quote]


Windows Live™: Keep your life in sync. Check it out.
Quote:
[b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Kelly McMullen



Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

PostPosted: Fri Mar 06, 2009 6:54 pm    Post subject: Another Milestone Reply with quote

Congratulations Deem! I guess you have time to do a few more modifications. 8>)

On Fri, Mar 6, 2009 at 6:29 PM, Deems Davis <deemsdavis(at)cox.net> wrote:
Quote:


Well today marked another pretty big milestone for me. Gary Towner (DAR)
drove down from Overgaard today, and performed an inspection of N519PJ. Gary helped walk me through the
repairmans cert application, and then handed me the A/W cert and the Ops Lim
and made the official entry in the Airframe logbook.
1st flight will occur as soon as the FAA sends my medical. My AME said to
expect May1 :'(

http://deemsrv10.com/album/Final%20Assembly/slides/DSC07403.html
Deems Davis # 406
'Its all done............ period!
http://deemsrv10.com/


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD
Back to top
View user's profile Send private message
bkbrown(at)minetfiber.com
Guest





PostPosted: Fri Mar 06, 2009 10:39 pm    Post subject: Another Milestone Reply with quote

I know how that all feels...and it all feels good. Congratulations Deems.

Bob Brown

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
geoff Combs



Joined: 04 Jan 2008
Posts: 10

PostPosted: Sat Mar 07, 2009 3:44 pm    Post subject: Re: Another Milestone Reply with quote

I can't wait to have that same smile on my face. Great airplane Deems.
Congratulations a job well done.

Geoff


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Build QB RV-10 N829GW
Back to top
View user's profile Send private message
etandrews(at)westnet.com.
Guest





PostPosted: Sat Mar 07, 2009 4:34 pm    Post subject: Another Milestone Reply with quote

Fantastic photo and result Deems!

Evan & Tania Andrews
40379 Flying

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group