Matronics Email Lists :: View topic - RV10-List Digest: 22 Msgs

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

RV10-List Digest: 22 Msgs - 03/07/09

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

davies.leo(at)gmail.com
Guest

Posted: Sun Mar 08, 2009 2:34 pm Post subject: RV10-List Digest: 22 Msgs - 03/07/09

Re: Fitting rear windows with the cabin roof off the plane.



I would counsel against this.



The cabin roof is quite "floppy" off the plane. If you bond the windows in this situation the cabin roof will invariably have a slightly different configuration to its installed position. When you install it you will be preloading the bonded plexiglass which is generally a bad idea.

 

The rear windows can be clamped in place with the cabin roof mounted by running straps around the plane and using spacers (lengths of 2 X 4 or similar) to apply pressure where needed.



Regards,



Leo Davies

 

RV6A flying

RV10 gestating

  [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum