 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
rparigor(at)SUFFOLK.LIB.N
Guest
|
 Posted: Mon Jan 09, 2006 12:01 am Post subject: Securing Adel Clamps? |
 |
|
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
klehman(at)albedo.net
Guest
|
| Posted: Mon Jan 09, 2006 4:52 am Post subject: Securing Adel Clamps? |
|
|
Hi Ron
I put a turn or two of self bonding silicone tape such as Spruce pn
09-30450 under the clamps in a few places.
Ken
rparigor(at)SUFFOLK.LIB.NY.US wrote:
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
klehman(at)albedo.net
Guest
|
| Posted: Mon Jan 09, 2006 8:19 am Post subject: Securing Adel Clamps? |
|
|
Hi Ron
I put a turn or two of self bonding silicone tape such as Spruce pn
09-30450 under the clamps in a few places.
Ken
rparigor(at)SUFFOLK.LIB.NY.US wrote:
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
klehman(at)albedo.net
Guest
|
| Posted: Mon Jan 09, 2006 9:31 am Post subject: Securing Adel Clamps? |
|
|
Hi Ron
I put a turn or two of self bonding silicone tape such as Spruce pn
09-30450 under the clamps in a few places.
Ken
rparigor(at)SUFFOLK.LIB.NY.US wrote:
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris
|
AdmID:053612CCD6580EA455D7538CA2C4CDAB
AdmID:C1B612EBA4062B00235F2F5E9FA4C345
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
klehman(at)albedo.net
Guest
|
| Posted: Mon Jan 09, 2006 10:23 am Post subject: Securing Adel Clamps? |
|
|
Hi Ron
I put a turn or two of self bonding silicone tape such as Spruce pn
09-30450 under the clamps in a few places.
Ken
rparigor(at)SUFFOLK.LIB.NY.US wrote:
I am working on tunnel/undercarriage area of a Europa XS Monowheel. I
installed Adel clamps on Undercarriage Mounting Frame 1/2" and 3/4" to
help with routing of wires, cables and hoses.
This is a complicated tight area on airplane.
The problem is if I try not too hard, I can twist clamps to a undesirable
position, where it would be hard to reposition once the firewall is
installed. The clamps are of proper size, and the next size down will not
fit.
Any suggestions how to get the clamps a bit more stuck?
Thx.
Sincerely
Ron Parigoris
|
AdmID:053612CCD6580EA455D7538CA2C4CDAB
AdmID:C1B612EBA4062B00235F2F5E9FA4C345
AdmID:2099579377CA7A35EFC477855FFB0349
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
