Matronics Email Lists :: View topic - Fuel & Oil line torque values

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fuel & Oil line torque values - help ???

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

AirMike

Joined: 27 Feb 2007
Posts: 514
Location: Nevada

Posted: Thu Mar 26, 2009 7:05 pm Post subject: Fuel & Oil line torque values - help ???

I was told to use a high temp permatex thread sealer on the fuel and oil lines (VA190, VA135 etc) to the oil cooler and fuel pressure monitor hoses.

What are the torque values on these aeroquip hoses (fuel & oil)????



Also - Alert note......................I got my FWF kit in the summer of '07. My VA190 hose was of the wrong diameter. I would suggest that people who got their FWF kits about then check the hose to make sure that it was right. I sent back the defective hose and Gus very kindly sent me the proper one. The VA190 takes a 7/8 wrench to turn. If you have a smaller exterior nut - it is the wrong size.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
See you OSH '18
Q/B - sold.

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum