 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
dougsnash
Joined: 14 Apr 2008
Posts: 281
|
 Posted: Wed Apr 08, 2009 5:09 am Post subject: Top window installation |
 |
|
Guys, is it my imagination or is there very little in the way of instructions on how to install the top window in the 701 plans? I've been looking through the plans and it says almost nothing.
Specifically, I am trying to figure out the following:
1. Exactly where the back edge of the window should lie. does it just get riveted to the 20mm lip that extends forward of the rear spar carry through "C" channel or is it suppoed to be tied into the rear spar "C"?
2. Is the top window just riveted directly to the cabin frame or are there supposed to be doubler strips under the heads of the rivets?
3. Is the top window attached with rivets or screws similar to the windshield?
Thanks for you help
Doug MacDonald
CH-701 Scratch builder
NW Ontario, Canada
Working on final assembly
Do Not Archive
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
 |
john.marzulli(at)gmail.co
Guest
|
| Posted: Wed Apr 08, 2009 9:22 am Post subject: Top window installation |
|
|
I am under the impression that the plexiglass is riveted on to the diagonal tube and the main expanse of the the side tubes.
My question is about riveting the plexiglass to the V-Frame where the side tube slides into the V-Frame. What have others done? That is structural so I do not want to rivet the plexiglass to it. Have others drilled larger holes in the plexiglass, riveted the frame and then installed the plexiglass over top?
Thanks,
John Marzulli
http://www.GenevieveMarzulli.org/
http://marzulli.smugmug.com/
http://701Builder.blogspot.com/
http://www.JohnMarzulli.net/
On Wed, Apr 8, 2009 at 6:06 AM, MacDonald Doug <dougsnash(at)yahoo.com (dougsnash(at)yahoo.com)> wrote:
[quote] --> Zenith701801-List message posted by: MacDonald Doug <dougsnash(at)yahoo.com (dougsnash(at)yahoo.com)>
Guys, is it my imagination or is there very little in the way of instructions on how to install the top window in the 701 plans? I've been looking through the plans and it says almost nothing.
Specifically, I am trying to figure out the following:
1. Exactly where the back edge of the window should lie. does it just get riveted to the 20mm lip that extends forward of the rear spar carry through "C" channel or is it suppoed to be tied into the rear spar "C"?
2. Is the top window just riveted directly to the cabin frame or are there supposed to be doubler strips under the heads of the rivets?
3. Is the top window attached with rivets or screws similar to the windshield?
Thanks for you help
Doug MacDonald
CH-701 Scratch builder
NW Ontario, Canada
Working on final assembly
Do Not Archive
===========
-List" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
Tommy Walker
Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207
|
| Posted: Thu Apr 09, 2009 3:25 am Post subject: Re: Top window installation |
|
|
Doug,
There's not a lot of info available on the top window installation.
I'm attaching a picture (I hope) of how the top window sits on top of the cabin frame underneath the windshield lip. We used a seam of acrylic (or some such) to seal the area. No drilling in the top cabin frame.
Hope this helps
Tommy Walker in Alabama
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
| Filesize: |
2.25 MB |
| Viewed: |
1831 Time(s) |
|
_________________
Tommy Walker
N25A - Anniston, AL |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
