 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
pascal(at)rv10builder.net
Guest
|
 Posted: Mon Apr 13, 2009 3:42 pm Post subject: TG-10 vent Adel clamps |
 |
|
I see on the section 27-6 (firewall) that they have one install the Heat vents . In figure 2 they show the adel clamps on the top of the vents (to hold the cable) but nothing to indicate what screw and the size of the clamp used. Is it a DG4 (1/4) or a 3/16.
What are those who have done this used for the clamps.
Thank you!
Pascal
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
rv(at)thelefflers.com
Guest
|
| Posted: Mon Apr 13, 2009 4:05 pm Post subject: TG-10 vent Adel clamps |
|
|
Good timing…… I was just looking at that yesterday too. The stainless steel ones that I got didn’t have the predrilled hole like the Van’s version did or mentioned the adel clamp. My thought was to wait until the plans call to install the cable and used whatever fits. Although by then, working room may be significantly tighter.
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of pascal
Sent: Monday, April 13, 2009 8:39 PM
To: rv10-list(at)matronics.com
Subject: Re: TG-10 vent Adel clamps
I see on the section 27-6 (firewall) that they have one install the Heat vents . In figure 2 they show the adel clamps on the top of the vents (to hold the cable) but nothing to indicate what screw and the size of the clamp used. Is it a DG4 (1/4) or a 3/16.
What are those who have done this used for the clamps.
Thank you!
Pascal
| Quote: | | http://www.matronics.com/Navigator?RV10-List |
0123456789
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Bob Turner
Joined: 03 Jan 2009
Posts: 885
Location: Castro Valley, CA
|
| Posted: Mon Apr 13, 2009 4:49 pm Post subject: Re: TG-10 vent Adel clamps |
|
|
FWF instructions call for a AN525-8R8 screw, a MS21919WDG3 clamp; held on the underside by one washer plus a lock nut.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Turner
RV-10 QB |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
