Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Step Crack

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
wstucklen1(at)cox.net
Guest





PostPosted: Wed Apr 22, 2009 2:08 pm    Post subject: Step Crack Reply with quote

Well it's happened to me after just 164 Hrs of flying! The right side step is cracked almost 2/3 of the way around with just a little bit of metal holding it together on the outside edge. Looks like I'll have to break it off the rest of the way or it will fall off during my flight to/from Lakeland tomorrow or back North on Friday (Daytona to Hartford CT). I don't think it's repairable so I've ordered a new one from Van's. They seemed to think that others having this problem have beefed up the steps to keep it from repeating in the future.......

Fred Stucklen
RV-7A N924RV 164 Hrs


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
ronlee(at)pcisys.net
Guest





PostPosted: Wed Apr 22, 2009 4:54 pm    Post subject: Step Crack Reply with quote

Befre you break it off, read this

http://tinyurl.com/decbxh

Ron Lee

---


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Vanremog(at)aol.com
Guest





PostPosted: Wed Apr 22, 2009 7:38 pm    Post subject: Step Crack Reply with quote

Fred-

Mine appear to be still good after 920 hrs TTAE. What is the "Bubba Factor" usually for your passengers?

N1GV (RV-6A Flying 920TTAE Silicon Valley, CA)




In a message dated 4/22/2009 3:09:43 P.M. Pacific Daylight Time, wstucklen1(at)cox.net writes:
Quote:
Well it's happened to me after just 164 Hrs of flying! The right side step is cracked almost 2/3 of the way around with just a little bit of metal holding it together on the outside edge.


Big savings on Dell XPS Laptops and Desktops!
[quote][b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
chuck(at)chuckdirect.com
Guest





PostPosted: Wed Apr 22, 2009 8:25 pm    Post subject: Step Crack Reply with quote

After discovering that mine was cracked two years ago --- 2/3 of the way
around also, I drilled the rivets out, took it down to my local professional
welder. He looked it over and said he'd advise against using any
reinforcements like gussets, etc. He rewelded it. I had it powder coated
again and it's been just fine since. Based on my experience, I'd have it
rewelded. Match drilling all those holes would be a bitch. Maybe you
should think about wrapping a reinforcement around the break like, damn I
hate to say this, duct tape to keep it from moving and getting any worse or
falling off in flight, until you get home???
Chuck

-------------------------------------------------
From: <wstucklen1(at)cox.net>
Sent: Wednesday, April 22, 2009 3:06 PM
To: "RV-List" <RV-List(at)matronics.com>
Subject: Step Crack

Quote:


Well it's happened to me after just 164 Hrs of flying! The right side step
is cracked almost 2/3 of the way around with just a little bit of metal
holding it together on the outside edge. Looks like I'll have to break it
off the rest of the way or it will fall off during my flight to/from
Lakeland tomorrow or back North on Friday (Daytona to Hartford CT). I
don't think it's repairable so I've ordered a new one from Van's. They
seemed to think that others having this problem have beefed up the steps
to keep it from repeating in the future.......

Fred Stucklen
RV-7A N924RV 164 Hrs




- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
wdleonard(at)gmail.com
Guest





PostPosted: Thu Apr 23, 2009 1:37 pm    Post subject: Step Crack Reply with quote

Just another reason to build a taildragger?  Smile
 
Do not archive
--
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net


On Wed, Apr 22, 2009 at 8:58 PM, Chuck Weyant <chuck(at)chuckdirect.com (chuck(at)chuckdirect.com)> wrote:
Quote:
--> RV-List message posted by: "Chuck Weyant" <chuck(at)chuckdirect.com (chuck(at)chuckdirect.com)>

After discovering that mine was cracked two years ago --- 2/3 of the way around also, I drilled the rivets out, took it down to my local professional welder.  He looked it over and said he'd advise against using any reinforcements like gussets, etc.  He rewelded it.  I had it powder coated again and it's been just fine since.  Based on my experience, I'd have it rewelded.  Match drilling all those holes would be a bitch.  Maybe you should think about wrapping a reinforcement around the break like, damn I hate to say this, duct tape to keep it from moving and getting any worse or falling off in flight, until you get home???
Chuck

-------------------------------------------------
From: <wstucklen1(at)cox.net (wstucklen1(at)cox.net)>
Sent: Wednesday, April 22, 2009 3:06 PM
To: "RV-List" <RV-List(at)matronics.com (RV-List(at)matronics.com)>
Subject: Step Crack

Quote:
--> RV-List message posted by: <wstucklen1(at)cox.net (wstucklen1(at)cox.net)>

Well it's happened to me after just 164 Hrs of flying! The right side step is cracked almost 2/3 of the way around with just a little bit of metal holding it together on the outside edge. Looks like I'll have to break it off the rest of the way or it will fall off during my flight to/from Lakeland tomorrow or back North on Friday (Daytona to Hartford CT). I don't think it's repairable so I've ordered a new one from Van's. They seemed to think that others having this problem have beefed up the steps to keep it from repeating in the future.......

Fred Stucklen
RV-7A N924RV  164 Hrs



cription,
www.matronics.com/Navigator?RV-List" target="_blank">http://www.matronics.com/Navigator?RV-List
ronics.com/" target="_blank">http://forums.matronics.com
Matt Dralle, List Admin.
=====





[quote][b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
acepilot(at)bloomer.net
Guest





PostPosted: Thu Apr 23, 2009 2:34 pm    Post subject: Step Crack Reply with quote

I was going to say that, but I bit my lip. Never seen a -4 with a
cracked step! Wink

Scott
http://corbenflyer.tripod.com/
Flying Corben Junior Ace - Building RV-4
Gotta Fly or Gonna Die

do not archive

David Leonard wrote:
Quote:
Just another reason to build a taildragger? Smile



- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
sbuc(at)hiwaay.net
Guest





PostPosted: Thu Apr 23, 2009 5:48 pm    Post subject: Step Crack Reply with quote

Scott wrote:
Quote:


I was going to say that, but I bit my lip. Never seen a -4 with a
cracked step! Wink

I recently put a right-side step on my -6, hope it doesn't crack........

By the way, shortening the step three inches made it a perfect fit for
the RV-6. I cut three inches out of the down tube, MIGed a piece of 4130
tubing into the leading edge of the tube, and welded it back together.
After dressing the welds, it looks like it was designed for the
taildragger. Smile

Sam Buchanan


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Bob Perkinson



Joined: 10 Jan 2006
Posts: 51
Location: Hendersonville, Tennessee

PostPosted: Thu Apr 23, 2009 7:49 pm    Post subject: Step Crack Reply with quote



- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
View user's profile Send private message Send e-mail
wdleonard(at)gmail.com
Guest





PostPosted: Thu Apr 23, 2009 8:52 pm    Post subject: Step Crack Reply with quote

Sigh, Sam.
 
Way to ruin a perfectly good taildragger excuse.
 
Dave Leonard
On Thu, Apr 23, 2009 at 6:43 PM, Sam Buchanan <sbuc(at)hiwaay.net (sbuc(at)hiwaay.net)> wrote:
Quote:
--> RV-List message posted by: Sam Buchanan <sbuc(at)hiwaay.net (sbuc(at)hiwaay.net)>

Scott wrote:
Quote:
--> RV-List message posted by: Scott <acepilot(at)bloomer.net (acepilot(at)bloomer.net)>

I was going to say that, but I bit my lip.  Never seen a -4 with a cracked step!  Wink


I recently put a right-side step on my -6, hope it doesn't crack........

By the way, shortening the step three inches made it a perfect fit for the RV-6. I cut three inches out of the down tube, MIGed a piece of 4130 tubing into the leading edge of the tube, and welded it back together. After dressing the welds, it looks like it was designed for the taildragger.  Smile

Sam Buchanan
Un/Subscription,
www.matronics.com/Navigator?RV-List" target="_blank">http://www.matronics.com/Navigator?RV-List
ronics.com/" target="_blank">http://forums.matronics.com
Matt Dralle, List Admin.
=====





--
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net
[quote][b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group