Matronics Email Lists :: View topic - Anything wrong mixing electrical and pneumatic connections?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Anything wrong mixing electrical and pneumatic connections?

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

rparigor(at)SUFFOLK.LIB.N
Guest

Posted: Tue Apr 28, 2009 8:50 am Post subject: Anything wrong mixing electrical and pneumatic connections?

Anyone have any downside comments on mixing electrical and pneumatic connections on the same connector?Plan is to mix 8 electrical and 3 pneumatic on port wing connector,  and 6 electrical and 1 pneumatic on starboard wing connector.The Anderson power pole connectors are reasonably water resistant if you seal the wire side with thin non corrosive silicone.Want to teather the wing side connector with 2 very thin bungee cords to root rib flange. Can easily extend bungee to connect with a 6" wing to fuse gap.See:http://www.europaowners.org/modules.php?set_albumName=album162&op=modload&name=gallery&file=index&include=view_album.phpThanking all in advanceRon Parigoris   [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum