 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
icubob(at)gmail.com
Guest
|
 Posted: Fri May 01, 2009 10:45 am Post subject: aeroflash strobes |
 |
|
hi all, i am ready to wire my aeroflash wingtip strobes. the strobe cable i received does not have the shielding connected to any of the insulated wires. the black wire is my ground wire. do i connect the shield to the black ground wire? at which end, or both ends? any input is appreciated.
bob noffs
[quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
Bruce(at)glasair.org
Guest
|
| Posted: Fri May 01, 2009 11:06 am Post subject: aeroflash strobes |
|
|
Unless otherwise directed in the install instructions, only ground one end of the shield. I would in this case ground at the power supply.
Bruce
WWW.Glasair.org
--
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
vshimsl(at)live.com
Guest
|
| Posted: Fri May 01, 2009 2:31 pm Post subject: aeroflash strobes |
|
|
I mounted the X-PAK power supply just aft of the rear storage compartment in my RV-8 and grounded the shield to the case at this point. I left the other end open (not connected).
No noise From my radio C Dynon D-180 C or AVMAP GPS at this time.
Vince H.
Pullman C WA USA
RV8 Final Inspection Prep
Date: Fri C 1 May 2009 13:43:11 -0500
Subject: aeroflash strobes
From: icubob(at)gmail.com
To: aeroelectric-list(at)matronics.com
hi all C i am ready to wire my aeroflash wingtip strobes. the strobe cable i received does not have the shielding connected to any of the insulated wires. the black wire is my ground wire. do i connect the shield to the black ground wire? at which end C or both ends? any input is appreciated.
bob noffs
Hotmail® has ever-growing storage! Don’t worry about storage limits. Check it out. [quote][b]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
