Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

G900X AHRS & remote compass

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
daveleikam(at)wi.rr.com
Guest





PostPosted: Tue May 05, 2009 7:48 pm    Post subject: G900X AHRS & remote compass Reply with quote

Does anyone have pictures of where they installed the AHRS and remote compass for a G900X system?

Dave Leikam
RV-10 #40496
N89DA (Reserved)
Muskego, WI

[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
robin1(at)mrmoisture.com
Guest





PostPosted: Tue May 05, 2009 9:15 pm    Post subject: G900X AHRS & remote compass Reply with quote

Does this help?

Robin


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List



100_2255.JPG
 Description:
 Filesize:  583.51 KB
 Viewed:  4943 Time(s)

100_2255.JPG


Back to top
vhicy(at)bigpond.com
Guest





PostPosted: Tue May 05, 2009 9:51 pm    Post subject: G900X AHRS & remote compass Reply with quote

Robin my only concern would be the harness atach cables. We installed our unit at the top of the baulkhead to get away from them

Chris
[quote] ---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
robin1(at)mrmoisture.com
Guest





PostPosted: Tue May 05, 2009 10:49 pm    Post subject: G900X AHRS & remote compass Reply with quote

Stainless Steel hardware.
Every problem has a solution, just add dollars.
If this was not S/S they definitely will interfere with the electronics. You may still have to do the same. These are really sensitive devices.

Robin

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris and Susie
Sent: Tuesday, May 05, 2009 10:49 PM
To: rv10-list(at)matronics.com
Subject: Re: G900X AHRS & remote compass



Robin my only concern would be the harness atach cables. We installed our unit at the top of the baulkhead to get away from them



Chris
Quote:

----- Original Message -----

From: Robin Marks (robin1(at)mrmoisture.com)

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Sent: Wednesday, May 06, 2009 3:13 PM

Subject: RE: G900X AHRS & remote compass



Does this help?

Robin
http://www.matronics.com/Navigator?RV10-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
No virus found in this incoming message.
Checked by AVG - www.avg.com
05/05/09 13:07:00
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
ron.mcgann(at)baesystems.
Guest





PostPosted: Tue May 05, 2009 11:19 pm    Post subject: G900X AHRS & remote compass Reply with quote

You know I reckon that may be the problem with my installation as well – where do you get the stainless steel harness attach cables? (My AHRS/Mag tray is in almost the same position).

Cheers,
Ron

Do not archive

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks
Sent: Wednesday, 6 May 2009 4:18 PM
To: rv10-list(at)matronics.com
Subject: RE: G900X AHRS & remote compass


Stainless Steel hardware.
Every problem has a solution, just add dollars.
If this was not S/S they definitely will interfere with the electronics. You may still have to do the same. These are really sensitive devices.

Robin

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris and Susie
Sent: Tuesday, May 05, 2009 10:49 PM
To: rv10-list(at)matronics.com
Subject: Re: G900X AHRS & remote compass



Robin my only concern would be the harness atach cables. We installed our unit at the top of the baulkhead to get away from them

 

Chris
Quote:

----- Original Message -----

From: Robin Marks (robin1(at)mrmoisture.com)

To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)

Sent: Wednesday, May 06, 2009 3:13 PM

Subject: RE: G900X AHRS & remote compass



Does this help?

Robin
   http://www.matronics.com/Navigator?RV10-List
Quote:
http://forums.matronics.com
Quote:
http://www.matronics.com/contribution
Quote:
 

No virus found in this incoming message.
Checked by AVG - www.avg.com
05/05/09 13:07:00 [quote]   "Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited. If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility. It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."

[b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
robin1(at)mrmoisture.com
Guest





PostPosted: Wed May 06, 2009 12:20 am    Post subject: G900X AHRS & remote compass Reply with quote

Ron,
  I was going to suggest you look at that but I was not following the thread that closely and didn’t want to add my 2 cents when it’s not worth a penny. I knew long before the install that we were going with S/S so we never had the stock units in place to see exactly how the interference presented itself on the display. I suspect if you just jiggle it while your avionics are on it may show you. If I recall you had a slight turn anomaly in only one direction? If so I doubt it’s the harness cables. I assume (bad idea) that the changes would be back & forth vs. only in one direction.
  Can someone can suggest a supplier for Ron as I am on the road (again) and don’t have my records handy.
Robin


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of McGANN, Ron
Sent: Wednesday, May 06, 2009 12:18 AM
To: rv10-list(at)matronics.com
Subject: RE: G900X AHRS & remote compass



You know I reckon that may be the problem with my installation as well – where do you get the stainless steel harness attach cables? (My AHRS/Mag tray is in almost the same position).

Cheers,
Ron

Do not archive


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks
Sent: Wednesday, 6 May 2009 4:18 PM
To: rv10-list(at)matronics.com
Subject: RE: G900X AHRS & remote compass


Stainless Steel hardware.
Every problem has a solution, just add dollars.
If this was not S/S they definitely will interfere with the electronics. You may still have to do the same. These are really sensitive devices.

Robin

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris and Susie
Sent: Tuesday, May 05, 2009 10:49 PM
To: rv10-list(at)matronics.com
Subject: Re: G900X AHRS & remote compass



Robin my only concern would be the harness atach cables. We installed our unit at the top of the baulkhead to get away from them



Chris
[quote]
---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
speckter(at)comcast.net
Guest





PostPosted: Wed May 06, 2009 4:20 am    Post subject: G900X AHRS & remote compass Reply with quote

I followed the recommendation from Garmin and put the AHRS on the mount from Van and the Magnitromiter in the tail like they picture in the manual.

It works great

Gary Specketer


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Dave Leikam
Sent: Thursday, June 04, 2009 10:46 PM
To: RV-10 matronics
Subject: G900X AHRS & remote compass


Does anyone have pictures of where they installed the AHRS and remote compass for a G900X system?



Dave Leikam
RV-10 #40496
N89DA (Reserved)
Muskego, WI
Quote:
http://www.matronics.com/Navigator?RV10-List
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
pitts_pilot(at)bellsouth.
Guest





PostPosted: Wed May 06, 2009 4:23 am    Post subject: G900X AHRS & remote compass Reply with quote

Nice picture! Thinking more about the electronic slip indicator .....
what's it do sitting still on the ground??? The other post about the
AHRS being out of cal makes sense. If it's accurate on the ground ....
or taxiing straight and out in flight I think points to a true slip.
Linn

Robin Marks wrote:
Quote:
Does this help?



Robin




------------------------------------------------------------------------


------------------------------------------------------------------------


Checked by AVG - www.avg.com



- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
stein(at)steinair.com
Guest





PostPosted: Wed May 06, 2009 7:54 am    Post subject: G900X AHRS & remote compass Reply with quote

The harness attach cables haven't really been a big problem in the RV-10's with the G900X Remote Mag in that area, but the attach bolts usually are. If either one of them causes an issue anyway, you can usually just degauss it....at least that's been our experience with lots of these RV10's with G900X's in them. Chris's solution isn't a bad one either, you just need to make sure it's fairly robust as well.

Cheers,
Stein
[quote] --


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Tim Olson



Joined: 25 Jan 2007
Posts: 2872

PostPosted: Wed May 06, 2009 8:44 am    Post subject: G900X AHRS & remote compass Reply with quote

Although mine isn't a G900X, the same theory applies and I
haven't seen a problem after the system is calibrated. You
can move the cables all you want and nothing changes. I
did use Brass hardware to mount the units though. But
used standard hardware on the cable ends. A good calibration
helps get rid of the iron effects on some systems.

Tim Olson - RV-10 N104CD
do not archive
SteinAir, Inc. wrote:
[quote] The harness attach cables haven't really been a big problem in the
RV-10's with the G900X Remote Mag in that area, but the attach bolts
usually are. If either one of them causes an issue anyway, you can
usually just degauss it....at least that's been our experience with lots
of these RV10's with G900X's in them. Chris's solution isn't a bad one
either, you just need to make sure it's fairly robust as well.

Cheers,
Stein

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
rv10free2fly(at)yahoo.com
Guest





PostPosted: Wed May 06, 2009 3:13 pm    Post subject: G900X AHRS & remote compass Reply with quote

Any pictures of each install please Gary?

Regards

Patrick
South Oz

Do Not Archive


From: gary <speckter(at)comcast.net>
To: rv10-list(at)matronics.com
Sent: Wednesday, 6 May, 2009 9:45:44 PM
Subject: RE: G900X AHRS & remote compass


I followed the recommendation from Garmin and put the AHRS on the mount from Van and the Magnitromiter in the tail like they picture in the manual.

It works great

Gary Specketer


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Dave Leikam
Sent: Thursday, June 04, 2009 10:46 PM
To: RV-10 matronics
Subject: RV10-List: G900X AHRS & remote compass


Does anyone have pictures of where they installed the AHRS and remote compass for a G900X system?



Dave Leikam
RV-10 #40496
N89DA (Reserved)
Muskego , WI
Quote:
http://www.matronics.com/Navigator?RV10-Listhttp://forums.matronics.com
0
Quote:
1
Quote:
2
Quote:
3

The new Internet Explorer 8 optimised for Yahoo!7: Faster, Safer, Easier. [url=http://au.rd.yahoo.com/search/ie8/mailtagline/*http://us.lrd.yahoo.com/_ylc=X3oDMTJxbnQwdTJhBF9zAzIxNDIwMjU2NTkEdG1fZG1lY2gDVGV4dCBMaW5rBHRtX2xuawNVMTEwMzQ0OAR0bV9uZXQDWWFob28hBHRtX3BvcwN0YWdsaW5lBHRtX3BwdHkDYXVueg--/SIG=11k6t9t1c/**http://downloads.yahoo.com/au/internetexplorer/]Get it now.[/url]. [quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
rv10free2fly(at)yahoo.com
Guest





PostPosted: Wed May 06, 2009 3:13 pm    Post subject: G900X AHRS & remote compass Reply with quote

Could try Hooker Harness?

Regards

Pat


From: Robin Marks <robin1(at)mrmoisture.com>
To: rv10-list(at)matronics.com
Sent: Wednesday, 6 May, 2009 5:46:47 PM
Subject: RE: G900X AHRS & remote compass


Ron,
  I was going to suggest you look at that but I was not following the thread that closely and didn’t want to add my 2 cents when it’s not worth a penny. I knew long before the install that we were going with S/S so we never had the stock units in place to see exactly how the interference presented itself on the display. I suspect if you just jiggle it while your avionics are on it may show you. If I recall you had a slight turn anomaly in only one direction? If so I doubt it’s the harness cables. I assume (bad idea) that the changes would be back & forth vs. only in one direction.
  Can someone can suggest a supplier for Ron as I am on the road (again) and don’t have my records handy.
Robin


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of McGANN, Ron
Sent: Wednesday, May 06, 2009 12:18 AM
To: rv10-list(at)matronics.com
Subject: RE: RV10-List: G900X AHRS & remote compass



You know I reckon that may be the problem with my installation as well – where do you get the stainless steel harness attach cables? (My AHRS/Mag tray is in almost the same position).

Cheers,
Ron

Do not archive


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Robin Marks
Sent: Wednesday, 6 May 2009 4:18 PM
To: rv10-list(at)matronics.com
Subject: RE: G900X AHRS & remote compass


Stainless Steel hardware.
Every problem has a solution, just add dollars.
If this was not S/S they definitely will interfere with the electronics. You may still have to do the same. These are really sensitive devices.

Robin

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris and Susie
Sent: Tuesday, May 05, 2009 10:49 PM
To: rv10-list(at)matronics.com
Subject: Re: G900X AHRS & remote compass



Robin my only concern would be the harness atach cables. We installed our unit at the top of the baulkhead to get away from them



Chris
[quote]
---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
speckter(at)comcast.net
Guest





PostPosted: Wed May 06, 2009 3:49 pm    Post subject: G900X AHRS & remote compass Reply with quote

No, but there are pix in the Garmin install manual. I could make copies and send them snail mail or Stein probably could send you electronic copies.
Sorry

Gary Specketer


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Patrick Pulis
Sent: Wednesday, May 06, 2009 6:13 PM
To: rv10-list(at)matronics.com
Subject: Re: G900X AHRS & remote compass


Any pictures of each install please Gary?



Regards



Patrick

South Oz



Do Not Archive



From: gary <speckter(at)comcast.net>
To: rv10-list(at)matronics.com
Sent: Wednesday, 6 May, 2009 9:45:44 PM
Subject: RE: G900X AHRS & remote compass
I followed the recommendation from Garmin and put the AHRS on the mount from Van and the Magnitromiter in the tail like they picture in the manual.

It works great

Gary Specketer


From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Dave Leikam
Sent: Thursday, June 04, 2009 10:46 PM
To: RV-10 matronics
Subject: G900X AHRS & remote compass


Does anyone have pictures of where they installed the AHRS and remote compass for a G900X system?



Dave Leikam
RV-10 #40496
N89DA (Reserved)
Muskego , WI
Quote:
http://www.matronics.com/Navigator?RV10-Listhttp://forums.matronics.comhttp://www.matronics.com/contribution htt="http://forums.matronics.com/" target=_blank rel=nofollow>http://for - List Contribution://www.matronics.com/contribution" target=_blank rel=nofollow>http://ww======================






The new Internet Explorer 8 optimised for Yahoo!7: Faster, Safer, Easier. [url=http://au.rd.yahoo.com/search/ie8/mailtagline/*http:/us.lrd.yahoo.com/_ylc=X3oDMTJxbnQwdTJhBF9zAzIxNDIwMjU2NTkEdG1fZG1lY2gDVGV4dCBMaW5rBHRtX2xuawNVMTEwMzQ0OAR0bV9uZXQDWWFob28hBHRtX3BvcwN0YWdsaW5lBHRtX3BwdHkDYXVueg--/SIG=11k6t9t1c/**http:/downloads.yahoo.com/au/internetexplorer/]Get it now.[/url].
Quote:
0
Quote:
1
Quote:
2
Quote:
3
Quote:
4
Quote:
5
Quote:
6
Quote:
7
Quote:
8
Quote:
9
Quote:
http://www.matronics.com/Navigator?RV10-List
0
Quote:
http://www.matronics.com/Navigator?RV10-List
1
Quote:
http://www.matronics.com/Navigator?RV10-List
2
Quote:
http://www.matronics.com/Navigator?RV10-List
3
Quote:
http://www.matronics.com/Navigator?RV10-List
4
Quote:
http://www.matronics.com/Navigator?RV10-List
5
Quote:
http://www.matronics.com/Navigator?RV10-List
6
Quote:
http://www.matronics.com/Navigator?RV10-List
7
Quote:
http://www.matronics.com/Navigator?RV10-List
8
[quote][b]


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group