Matronics Email Lists :: View topic - Bendix 10-357210-1 Ignition switch

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Bendix 10-357210-1 Ignition switch

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

Thruster87

Joined: 16 Apr 2008
Posts: 193
Location: Australia

Posted: Sun May 31, 2009 8:47 pm Post subject: Bendix 10-357210-1 Ignition switch

Bought a rotary ignition switch and would like to know which terminal goes to what on a Jabiru 3300 engine.Terminals marked R,L LR,BO,Batt ,S and G. L= left mag,R= right mag  G= ground.Don't know where to connect the rest [Bendix 10-357210-1 Ignition switch key OFF,L,R,Both and twist to start] Any help would be appreciated. Cheers T87

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

bakerocb

Joined: 15 Jan 2006
Posts: 727
Location: FAIRFAX VA

Posted: Mon Jun 01, 2009 3:51 am Post subject: Bendix 10-357210-1 Ignition switch

6/1/2009



Hello Thruster87, You wrote: "Bought a rotary ignition switch and would like 

to know ......"



Another one of the advantages of using two toggle switches for this purpose 

instead of the unreliable rotary switch is to avoid fumbling around with the 

confusing wiring required.



'OC' Says: "The best investment we can make is the effort to gather and 

understand knowledge."



===============================================



Time: 09:50:01 PM PST US

Subject: Bendix 10-357210-1 Ignition switch

From: "Thruster87" <alania(at)optusnet.com.au>

Bought a rotary ignition switch and would like to know which terminal goes 

to what

on a Jabiru 3300 engine.Terminals marked R,L LR,BO,Batt ,S and G. L= left

mag,R= right mag  G= ground.Don't know where to connect the rest [Bendix 

10-357210-1

Ignition switch key OFF,L,R,Both and twist to start] Any help would be

appreciated. Cheers T87

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Mon Jun 01, 2009 6:24 pm Post subject: Bendix 10-357210-1 Ignition switch

At 11:47 PM 5/31/2009, you wrote:

 	  Quote: 	
		  



Bought a rotary ignition switch and would like to know which 

terminal goes to what on a Jabiru 3300 engine.Terminals marked R,L 

LR,BO,Batt ,S and G. L= left mag,R= right mag  G= ground.Don't know 

where to connect the rest [Bendix 10-357210-1 Ignition switch key 

OFF,L,R,Both and twist to start] Any help would be appreciated. Cheers T87

   Unless you have a shower-of-sparks ignition system,
	


   you don't need BO. If the engine doesn't require

   starting on one ignition only, you don't use the LR

   terminal either.

   See Figure Z-26 at:



http://www.aeroelectric.com/PPS/Adobe_Architecture_Pdfs/Z26K_27K.pdf



        Bob . . .



        ----------------------------------------)

        ( . . .  a long habit of not thinking   )

        ( a thing wrong, gives it a superficial )

        ( appearance of being right . . .       )

        (                                       )

        (                  -Thomas Paine 1776-  )

        ----------------------------------------

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Thruster87

Joined: 16 Apr 2008
Posts: 193
Location: Australia

Posted: Mon Jun 01, 2009 6:50 pm Post subject: Re: Bendix 10-357210-1 Ignition switch

 	  nuckolls.bob(at)aeroelect wrote: 	
		  At 11:47 PM 5/31/2009, you wrote:

 	  Quote: 	
		  



Bought a rotary ignition switch and would like to know which 

terminal goes to what on a Jabiru 3300 engine.Terminals marked R,L 

LR,BO,Batt ,S and G. L= left mag,R= right mag  G= ground.Don't know 

where to connect the rest [Bendix 10-357210-1 Ignition switch key 

OFF,L,R,Both and twist to start] Any help would be appreciated. Cheers T87

   Unless you have a shower-of-sparks ignition system,

	


   you don't need BO. If the engine doesn't require

   starting on one ignition only, you don't use the LR

   terminal either.

   See Figure Z-26 at:



http://www.aeroelectric.com/PPS/Adobe_Architecture_Pdfs/Z26K_27K.pdf



        Bob . . .



        ----------------------------------------)

        ( . . .  a long habit of not thinking   )

        ( a thing wrong, gives it a superficial )

        ( appearance of being right . . .       )

        (                                       )

        (                  -Thomas Paine 1776-  )

        ---------------------------------------- 	
Much appreciated Cheers T87

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum