indigoonlatigo(at)msn.com Guest
|
Posted: Fri Jun 12, 2009 3:54 pm Post subject: door pins and ajar indicator |
|
|
Here are a couple of pics of doing it differently on the door open indicators. First notice the different type of switch switch. No magnets. I put these switches in the rear for the rear pin as those are the ones most unlikely to engage. Also C note the depth that my pins go in and I also put an additional 1/8 piece of aluminum backing to the fuselage bulkhead C it is tied in with the plastic pin aligning blocks. Lastly C I left the threaded bolt inserts in my hollow rods for strenth. Their depth goes beyond the plastic block that is attached to the (door).
JOhn G
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
Description: |
|
Filesize: |
137.98 KB |
Viewed: |
538 Time(s) |
|
Description: |
|
Filesize: |
168 KB |
Viewed: |
538 Time(s) |
|
Description: |
|
Filesize: |
165.1 KB |
Viewed: |
538 Time(s) |
|
Description: |
|
Filesize: |
171.98 KB |
Viewed: |
538 Time(s) |
|
|
|