Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Strobe Power Supply Location

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
wroe1(at)dbtech.net
Guest





PostPosted: Tue Jun 23, 2009 6:11 am    Post subject: Strobe Power Supply Location Reply with quote

I am building an RV-7 and my Whelen strobe power supply (HDACF) has
ended up being quite close to my pitch servo (approx. 4" below). Should
I be concerned about the strobe unit emitting noise that would in turn
cause pulsations w/n the auto-pilot servo?

The strobe power supply was installed early on without the pitch servo
in mind. Build and learn...

I have routed no wiring yet.

Thanks!

Wade Roe
EAA 557
Aeronca 7AC flying
RV-7 in process


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Tue Jun 23, 2009 7:33 am    Post subject: Strobe Power Supply Location Reply with quote

At 08:58 AM 6/23/2009, you wrote:
Quote:

I am building an RV-7 and my Whelen strobe power supply (HDACF) has
ended up being quite close to my pitch servo (approx. 4" below). Should
I be concerned about the strobe unit emitting noise that would in turn
cause pulsations w/n the auto-pilot servo?

No
Quote:
The strobe power supply was installed early on without the pitch servo
in mind. Build and learn...

I have routed no wiring yet.

There are no effects emanating from the strobe supply
that put the servo system at risk.
Bob . . .

---------------------------------------
( . . . a long habit of not thinking )
( a thing wrong, gives it a superficial )
( appearance of being right . . . )
( )
( -Thomas Paine 1776- )
---------------------------------------


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
wroe1(at)dbtech.net
Guest





PostPosted: Tue Jun 23, 2009 8:22 am    Post subject: Strobe Power Supply Location Reply with quote

Thank you Bob!

Wade Roe

SOUTHERN CARBIDE TECHNOLOGIES, INC.
7739 Unity Road M&D Industrial Park
Tuscaloosa, AL 35401

205-248-6700
205-248-6372 fax

--


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group