Matronics Email Lists :: View topic - prop blade pitch angle setting

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

prop blade pitch angle setting

Matronics Email Lists Forum Index -> Zenith701801-List

View previous topic :: View next topic

Author Message

ajroseca(at)nf.sympatico.
Guest

Posted: Mon Jul 13, 2009 4:28 pm Post subject: prop blade pitch angle setting

Hi Guys

 what is the best blade pitch degree adjustment for  a 3 blade warpdrive

 for best performance on floats with the ch-701. 100  hp rotax

  

 A.Rose

   [quote][b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

Tommy Walker

Joined: 12 Jan 2006
Posts: 442
Location: Anniston, AL 36207

Posted: Tue Jul 14, 2009 4:51 am Post subject: prop blade pitch angle setting

Alvin,  

   

We started with about 13 degrees and went to 10 and eventually, about 11 degrees worked best for us.   You might want to shoot for about 5200 rpm on the ground at full power.  We tied our main gear down first so we didn’t have to worry about the aircraft being drug forward by the engine.  

   

Good luck,  

Tommy Walker in Alabama  

Do Not Archive  

   

The term [i]mayday[/i] used for signaling for help (after SOS), comes from the French word [i]m'aidez[/i], which is pronounced "may day" and means "Help Me."  

   

       [quote][b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

_________________
Tommy Walker
N25A - Anniston, AL

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith701801-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum