Matronics Email Lists :: View topic - Fuel Flow - Hoskins FT 101 Fuel Flow not working

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fuel Flow - Hoskins FT 101 Fuel Flow not working

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

rogrbal

Joined: 18 Jul 2009
Posts: 3

Posted: Sat Jul 18, 2009 7:03 am Post subject: Fuel Flow - Hoskins FT 101 Fuel Flow not working

Hoskins FT 101 Fuel Flow not working:

1.  Lights stay on - all zeros

2.  Unplugging connector in rear gets it working for a while, then it goes to #1 state again.

3.  Resetting by doing #2 does not carry forward any fuel used between resets.

4.  If reset it every time it goes to state #1, it will accumulate all the fuel used while working.  Only missing that used while in state #1.



Since it always shows some power applied, I do not think this is an intermittent power problem.



Since it accumulates, I do not think this is a problem in the wire going to the battery for residual power to retain accumulated fuel.



The transducer has three wires to it, maybe one of them is the problem.



Since doing #2 always fixes it, maybe the problem is in or near this plug?



Any ideas help??



Wiring diagram is available at

http://www.instrumenttech.com/productsupport.shtml

Look in the POH for the FT101A.  It shows the plug pin diagram.  Although I have a 101 the only difference I can tell, is that the type reading - gallons, pounds, etc. - is user resetable vice manufacturer set.



Thanks for your ideas.  Need to fix it tomorrow - Sunday 7/19/09



Roger

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

FT101 FuelFlow POH.pdf

Description:

Download

Filename:

FT101 FuelFlow POH.pdf

Filesize:

273.46 KB

Downloaded:

585 Time(s)

_________________
Thanks for the help.

Scott Keadle

Joined: 10 Jan 2006
Posts: 31
Location: Lake Norman, North Carolina

Posted: Sun Jul 19, 2009 12:07 pm Post subject: Re: Fuel Flow - Hoskins FT 101 Fuel Flow not working

[quote="rogrbal"]Hoskins FT 101 Fuel Flow not working:

"...Since doing #2 always fixes it, maybe the problem is in or near this plug?"



 Roger,



If doing #2 always fixes it, I suggest that you not use the plug, and maybe see a gastroenterologist. Sorry, I couldn't resist.

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
Scott Keadle
14A, Lake Norman Airpark
N426AK RV-10, final assembly
N246SK, Giles 202, flying

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum