Matronics Email Lists :: View topic - Bottom position of 6B17-1

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Bottom position of 6B17-1

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

z601a(at)anemicaardvark.c
Guest

Posted: Thu Aug 06, 2009 8:24 am Post subject: Bottom position of 6B17-1

I'm having a bit of fun trying to figure out where, longitudinally, the bottom 

of 6B17-1 should be located. 6B17 shows the top connection, and indicates 

that the bottom is affixed to 6B1-4.



Maybe I'm staring at it and don't see it, but I haven't found the dimension to 

locate the bottom of 6B17-1. Obviously, those of you who are further along 

have done something, and probably found the dimension. Any chance of sharing 

this information with me?



TIA

-- 

=============================================

                Do not archive.

=============================================

                Jim B Belcher

    BS, MS Physics, Math, Computer Science

                  A&P/IA

     Retired aerospace technical manager

=============================================

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

ashleyw(at)gvtc.com
Guest

Posted: Thu Aug 06, 2009 9:11 am Post subject: Bottom position of 6B17-1

Jim.



Check the builders quide  6 B 17 page 9



Floyd Wilkes

601XL  O-200

---

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

jaybannist(at)cs.com
Guest

Posted: Thu Aug 06, 2009 9:48 am Post subject: Bottom position of 6B17-1

Jim,

 

 What is critical is the 90 deg angle between the torque tube and  the face of 6B17-1, both horizontally and veritcally.  Cleco 6B17-1 to 6B5-1.  Lay a tube or a rod in the holes where the torque tube goes and adjust 6B17-1 to make a 90 deg angle between it and the rod or tube for vertical alignment.  Measure from both edges of the bottom of 6B17-1 to 6B5-5 to make sure it is parallel to 6B5-5.

 

 As an aside, I don't know what you mean by "TIA", but to me it means "transient ischemic attack" - a mini stroke.  I've had one and it is a really scary thing.

 

 Jay Bannister

 

   

 

   

 

 --

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

z601a(at)anemicaardvark.c
Guest

Posted: Thu Aug 06, 2009 12:31 pm Post subject: Bottom position of 6B17-1

On Thursday 06 August 2009 12:47, jaybannist(at)cs.com wrote:

 	  Quote: 	
		    Jim,



 What is critical is the 90 deg angle between the torque tube and? the face

 of 6B17-1, both horizontally and veritcally.? Cleco 6B17-1 to 6B5-1.? Lay a

 tube or a rod in the holes where the torque tube goes and adjust 6B17-1 to

 make a 90 deg angle between it and the rod or tube for vertical alignment.?

 Measure from both edges of the bottom of 6B17-1 to 6B5-5 to make sure it is

 parallel to 6B5-5.


	


Thanks for the idea. I may do that.



 	  Quote: 	
		   As an aside, I don't know what you mean by "TIA", but to me it means

 "transient ischemic attack" - a mini stroke.? I've had one and it is a

 really scary thing.


	


TIA = Thanks In Advance



-- 

=============================================

                Do not archive.

=============================================

                Jim B Belcher

    BS, MS Physics, Math, Computer Science

                  A&P/IA

     Retired aerospace technical manager

=============================================

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum