Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

U/C frame

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
pjeffers(at)talktalk.net
Guest





PostPosted: Thu Aug 20, 2009 12:57 am    Post subject: U/C frame Reply with quote

From: Peter Jeffers [mailto:pjeffers(at)talktalk.net]
Sent: 20 August 2009 08:52
To: 'owner-europa-list-server(at)matronics.com'
Subject: U/C frame


Hi Rob,
The struts that you say ‘appear to be glued in’ are in fact. These struts were incorporated into the U/C frame as a mod way back in 1996 as a mandatory mod. The mod concerned is no 28 and since you will probably not have a copy of it I attach one herewith.
So they will be removable with some local heating and a bit of persuasion. Hot air gun heat should be enough. No flames! As you will notice it is ‘stuck in with Redux 420.
Later build kits had these struts welded in as standard.
Hope this helps.

Pete Jeffers


From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of Robert Hatton
Sent: 20 August 2009 01:54
To: europa-list(at)matronics.com
Subject: Landing Gear Frame


I am checking over the landing gear after a heavy landing and one of the supports in the Landing Gear Frame appears to have a slight and small crack. Although it still attached to the frame. It does not seem to have been welded (but I could be wrong), it seems to have been glued in, and I wonder if anyone has any advice for how I might remove the support in order to clean up and subsequently re-attach it? I am taking the opportunity to clean up the rest of the Landing gear frame too, which does not display any other issues.

I have attached the diagram and a photo to show what I am looking at, although it is difficult to see the crack. Any advice would be gratefully received.

All the Best

Rob

Robert Hatton
email: roberthatton1(at)googlemail.com
US Cell: +01 303 906 9395

No virus found in this incoming message.
Checked by AVG - www.avg.com
08/19/09 06:03:00


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List



Europa_Mod_28.jpg
 Description:
 Filesize:  111.81 KB
 Viewed:  751 Time(s)

Europa_Mod_28.jpg



Europa_Mod_28_001.jpg
 Description:
 Filesize:  49.87 KB
 Viewed:  751 Time(s)

Europa_Mod_28_001.jpg


Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group