Matronics Email Lists :: View topic - Airflow Oil Box Splitter

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Airflow Oil Box Splitter

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Tue Aug 25, 2009 7:19 am Post subject: Airflow Oil Box Splitter

For further information about the Oil box splitter, as well as improved 

performance Oil coolers and other products. I encourage people to contact:



William F. Genevro

Managing Director

949-218-9701



(at) Airflow Systems directly. Bill has spent a LOT of time researching Oil 

temps and associated issues, speaking with many RV10 builders and has a 

large knowledge base from which he's developed these solutions. He's 

easy to talk to. The oil splitter kits are available directly from him 

for $49. And are free to those who buy one of his oil coolers.



Deems Davis N519PJ

http://deemsrv10.com/index.html

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Tue Aug 25, 2009 8:42 am Post subject: Airflow Oil Box Splitter

Thanks for this info Deems.  I'll have to check with Alex D and find out why this wasn't included when I got my 2006X from him.



Michael



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rene(at)felker.com
Guest

Posted: Tue Aug 25, 2009 11:44 am Post subject: Airflow Oil Box Splitter

Please let me know what you find out, I did not get one either and I could

use a little more improvement.  Saw oil temps in the low 220's when I left

Las Vegas last month.....



Rene' Felker

RV-10 N423CF Flying

801-721-6080



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Wed Aug 26, 2009 10:52 am Post subject: Airflow Oil Box Splitter

Just wanted to chime in quick, just had a nice chat with Bill and he is sending out the splitters to anyone that has bought one of their coolers for no additional cost if you give him a ring.  He only asks that you pay $15 for the shipping.



Michael



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

nukeflyboy

Joined: 05 Jan 2008
Posts: 162
Location: Granbury, TX

Posted: Wed Aug 26, 2009 1:47 pm Post subject: Re: Airflow Oil Box Splitter

I also just called Airflow and got good support.  In defense of Alex, Airflow said that the kit is a very recent development and may not have been available at the time ours were sent.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Dave Moore
RV-6 built and sold
RV-10 built and flying

msausen

Joined: 25 Oct 2007
Posts: 559
Location: Appleton, WI USA

Posted: Wed Aug 26, 2009 2:38 pm Post subject: Airflow Oil Box Splitter

Yep, I was talking to Alex to at the same time and you may have noticed I was copying him on the emails.  Alex was very interested in making sure there was no problem with the fact the cooler was purchased through him and that Bill would send the splitter out no matter who it was purchased from.  He was glad to see there was no problem.



  Bill also said to be sure that the cooler was sealed to the box with RTV as well as making sure all the holes in the cooler box to firewall fit was sealed to ensure all available pressure was directed through the cooler.  He also echoed the feelings that many of us have in that there is not enough exit area to get the cooling air out of the cowling.



Michael



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum