 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Curt.Thompson(at)verizon.
Guest
|
 Posted: Sat Aug 29, 2009 7:13 am Post subject: Trouble making the nose ribs on the form block |
 |
|
Joe,
I’d recommend the “Scratch Building Basics for Metal Aircraft” DVD from HomebuiltHelp.com. It has some pretty good description on doing this and other things.
I’ve attached a picture of the fluting tools I have. Some are home-made – some are purchased. I also had one I made from rods welded to vise-grips but that broke. The two I finally ended up using was the one with the red jaw (broken and needs to be replaced) and the small one at the top (particularly for nose flutes).
Curt
From: owner-zenith701801-list-server(at)matronics.com [mailto:owner-zenith701801-list-server(at)matronics.com] On Behalf Of joe motis
Sent: Friday, August 28, 2009 7:16 PM
To: zenith701801-list(at)matronics.com
Subject: Re: Zenith701801-List: Fitting wings to fuse
| Quote: |
I am having a bit of trouble making the nose ribs on the form block. Using the vise grip fluting tool from Spruce but maybe the 3/8 rod tool shown in the prints would work better. Any helpful hints? |
Joe Motis
750 plans and Pietenpol assistant
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
| Description: |
|
| Filesize: |
48.5 KB |
| Viewed: |
3052 Time(s) |
|
|
|
| Back to top |
|
 |
kmccune
Joined: 22 Sep 2007
Posts: 577
Location: Wisconsin, USA
|
| Posted: Thu Sep 03, 2009 3:38 am Post subject: Re: Trouble making the nose ribs on the form block |
|
|
I can't figure out who posted the question but here is my $.02.
The scratch built video is a very good buy, it will get you going quicker.
The 3/8 in rod ( I use the skinny end of a small ball peen hammer handle) is pounded into the formed flutes on the block. This makes very nice flutes and is pretty easy and quick. I've only used the fluting pliers ( home made ones) for flattening the rib after it is out of the form block.
Hope this helps
Kevin
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
“Always do what you are afraid to do.”
R.W. Emerson (1803-1882)
"Real freedom is the sustained act of being an individual." WW - 2009
"Life is a good deal...it's worth it" Feb 1969
Dorothy McCune |
|
| Back to top |
|
|
bryanekholm
Joined: 16 May 2007
Posts: 25
Location: Minnesota
|
| Posted: Fri Sep 04, 2009 8:23 am Post subject: Re: Trouble making the nose ribs on the form block |
|
|
I wish I would have had that info or thought of that technique while I was forming my ribs, etc. I think I ended up splitting the forming bocks at least twice to apply the flutes with my fluting pliers. It would have made the process go much quicker and easier if I had been able to just leave the ribs in the forming blocks while pounding down the flanges. It all worked out though.
Bryan Ekholm
[The 3/8 in rod ( I use the skinny end of a small ball peen hammer handle) is pounded into the formed flutes on the block. This makes very nice flutes and is pretty easy and quick. I've only used the fluting pliers ( home made ones) for flattening the rib after it is out of the form block.][/quote]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
_________________
Bryan Ekholm |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
