Lynn Matteson
Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan
|
 Posted: Thu Sep 10, 2009 6:17 pm Post subject: Scrap 2200 Jabiru needed |
 |
|
I'm going to try some things on my Jabiru 2200, and I'd like to find
a scrap engine, in any condition, to do some set-up work on. I would
need a block, cylinders, heads, oil pan, and intake pipes. Nothing
else is needed, I think. I just want to try some different intake
manifolding, so condition is unimportant....the junkier the better,
with reason. In fact, it wouldn't have to be scrap, I could turn it
into scrap for you. : )
Seriously, I just need the engine to make some measurements from and
it could be returned unharmed. I could pick it up if not TOO far
away. Let me know if anybody has something....hopefully in the US to
keep shipping/travel costs down.
The reason for wanting another engine is to keep my plane flying and
not tied up while I do some designing on a different intake manifold
system.
Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062, 762.9 hrs
Countdown to 1000 hrs~237 to go
Sensenich 62"x46" Wood prop
Electroair direct-fire ignition system
Rotec TBI-40 injection
Status: flying
do not archive
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM |
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
