nukeflyboy
Joined: 05 Jan 2008
Posts: 162
Location: Granbury, TX
|
 Posted: Thu Sep 10, 2009 8:43 am Post subject: Info and Question on Van's FWF Kit (including hoses) |
 |
|
I have been reading the posts about engines hoses and wondering about what to get and what to leave out in Van's FWF kit. Another RV-10 builder recently got the kit and I noticed that the hoses looked like teflon coated stainless steel braid. I emailed Van's to find out and this is what they sent me. Included is the current inventory of the kit.
start of Van's note:
1) The Fuel and Oil lines in the RV-10 Firewall Forward kits
are teflon coated with stainless steel braid.
(2) The Vibration mount we sell are made in the USA by
"Vibration Isolation Products".
(3) I have the list of the RV-10 Firewall Forward kit below for
you.
Best Regards
Van's
FF-10 IO-540 F.WALL FWD.KIT IO-540
3.00 CT A-740 BLACK PUSH PULL CABLE BLACK
2.00 DUCT CBT-5/8 COOLING BLAST TUBE
2.00 EA 4" DUCT HOSE CLAMP 4" HOSE CLAMP
1.00 EA CV HOSE 7545 BREATHER HOSE -540
6.00 EA GASKET 77611 BLO-PROOF EXHST GASKT
4.00 EA DYNA VI I(O)-540 VIB.ISO. RV-10 ONLY
1.00 EA OIL COOLER 20006A OIL COOLER I(O)-540
1.00 ES ALTERNATOR DELUXE 60A KIT W/OV PROTECT
1.00 FAB-360/540 FLTRD A/BOX-360 FI320
1.00 FF-1005 BREATHER TUBE
1.00 IE VMP INSTALL KIT FITTINGS/HOSES
1.00 PROP GOV MT P-860-3 I(O)-540 LYCOMING
1.00 VA-102 FUEL PRES. HOSE 15.5
1.00 VA-133 OIL PRESS. HOSE 27.25
1.00 VA-135 OIL COOLER HOSE 16.5
1.00 VA-168 SENDER MOUNT
1.00 VA-186 OIL COOLER BOX ASSY.
1.00 VA-187 4" FLANGED DUCT
1.00 VA-190 OIL COOLER HOSE 27"
1.00 BAF-10-540 BAFFLE KIT IO-540
1.00 PT-035X1/4X4' LO PRES-BRKE RES.TUBE
1.00 SS304-26GAX1/2X9 SCAT CLAMP !!SHARP!!
1.00 VENT SCAT 2X3' RED 2" SCAT 3' LONG
1.00 VENT SCAT 2X6' SCAT TUBE X 6 FT
1.00 VENT SCAT 4X16" 4" DIA. RED SCAT HOSE
1.00 EA DYNA BOLT I(O)-540 MOTOR MOUNT BOLT KIT
1.00 BAG 516 RIVET AN426AD3-3.5
1.00 BAG 517 RIVET AN426AD3-4
1.00 BAG 518 RIVET AN426AD4-4
1.00 BAG 519 RIVET AN426AD4-5
1.00 BAG 520 MISC. AN BOLTS
1.00 BAG 521 MISC. WASHERS
1.00 BAG 522-1 MISC. FITTINGS/CLAMPS
1.00 BAG 523-1 FITTINGS/MISC.
1.00 BAG 524 MISC. CLAMPS
1.00 BAG 525-1 MISC/BEARINGS
1.00 BAG 526-1 CABIN HEAT SHUTTLE HW
1.00 PT-062X1/4X24" HIGH PRESSURE
1.00 CT BLK THROTTLE 47.5 10 (I(O)-540)
1.00 CT BLUE VPROP 72.5 10 (I(O)-540)FWD GOV
1.00 CT RED VMIXTURE 51.5 10 (I(O)-540)
1.00 VA-182-PC KIT THR/MIX BKT IO VERT
1.00 VA-189 FUEL LINE IO-540 25.5
1.00 DOC FF-IO-540 TEXT/DWGS RV-10 F.FWD
1.00 EA EXH 10 I(O)-540 I(O)-540 VETTERMAN
1.00 VA-138 FUEL SUPPLY HOSE 14.0
end of Van's note
First of all it is good to see that they have switched to teflon/SS hoses for the fuel and oil lines.
I am not familiar with the "Vibration Isolation Products" engine mount. Is anyone? It is a division of Pacific Molded Technologies in California. Do you recommend that I stick with Lord Mounts?
So far it looks like I will stick with Van's hoses and just about everything else but will drop a couple items. I have another source for a Plane Power alternator so I will drop it. (They are good alternators and I recommend that you use them.) I bought an AirFlow oil cooler from Alex and will drop it from the kit. I still need to make up my mind on the engine mounts and throttle quadrant.
Any other thoughts?
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Dave Moore
RV-6 built and sold
RV-10 built and flying |
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
