david.nelson(at)pobox.com Guest
|
Posted: Tue Nov 03, 2009 5:15 pm Post subject: What is the SD-8's regulator doing when not being used |
|
|
Thank you.
/\/elson
On Tue, 3 Nov 2009, Robert L. Nuckolls, III wrote:
Quote: |
<nuckolls.bob(at)aeroelectric.com>
At 12:29 PM 11/3/2009, you wrote:
>
> <etienne.phillips(at)gmail.com>
>
> Hi /\/elson
>
> Since there's no current flowing through the regulator, my guess is
> that it's not doing anything... Converting the open-circuit voltage of
> the SD-8 to 13.8V (or whatever yours is set to) doesn't dissipate any
> energy until the current starts to flow.
>
> Etienne
Correct.
Bob . . .
---------------------------------------
( It's MATRONICS FUND RAISER MONTH! )
( Do your part to keep this marvelous )
( tool sharp and available to all our )
( brothers in the OBAM aviation )
( community. )
---------------------------------------
|
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|