Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Epic Riveting Day

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
emrath(at)comcast.net
Guest





PostPosted: Fri Nov 20, 2009 8:27 pm    Post subject: Epic Riveting Day Reply with quote

Hang in there Norman, I've just past 12 years and finally moved into a
hanger and hung the wings on my RV-6A this month.
Marty in Brentwood TN
Do Not Archive
Time: 09:59:41 PM PST US
From: Norman Hunger <norman96(at)telus.net>
Subject: Epic Riveting Day
Today was an epic day in my 13 year build. I pounded about 30 rivets
and the construction log says that hasn't happened since 2002. The bad
news came later when I discovered I hadn't dimpled the next row of
holes to their final size of screw so I had to drill everything out
again. Tomorrow I start even further behind as I will now shim it to
perfection at the bottom corners. This isn't starting off too good...

Norman Hunger
RV6A Delta BC
Do not archive


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
jmsj(at)roadrunner.com
Guest





PostPosted: Sat Nov 21, 2009 3:34 am    Post subject: Epic Riveting Day Reply with quote

Quote:
> Hang in there Norman, I've just past 12 years and finally moved into a
> hanger and hung the wings on my RV-6A this month.
Marty in Brentwood TN<<


Keep it up, guys! I don't feel so bad about my -7A sitting in the shop
collecting dust. Smile

Jim Sears in KY
do not archive


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
rv6n(at)optonline.net
Guest





PostPosted: Sat Nov 21, 2009 3:44 pm    Post subject: Epic Riveting Day Reply with quote

Guys C
6nbsp;
12 years build time C 13 years build time C it is what it is but I hope what happened to me does not happen to you E 6nbsp; I took me 6 years to build my RV6 E 6nbsp; Three months after completion I had a heart attack and a triple 6nbsp;by-pass surgery six months after that E 6nbsp; That was two years ago and I still have no medical E 6nbsp; However C the good news is today I saw a great AME 6nbsp;and believe I will be flying again real 6nbsp;soon E 6nbsp; So get to work before it is too late and you begin wishing you were building an LSA E 6nbsp; Besides C nothing flies 6nbsp;better than an RV E
6nbsp;
Bob Bales

---


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
bobbyhester(at)newwavecom
Guest





PostPosted: Sat Nov 21, 2009 6:07 pm    Post subject: Epic Riveting Day Reply with quote

Marty, what airport are you at. I might stop by sometime I'm out and about.

----
Surfing the web from Hopkinsville, KY
Check out the latest on my website at:
http://home.newwavecomm.net/bobbyhester/RVSite.htm

emrath wrote:
Quote:


Hang in there Norman, I've just past 12 years and finally moved into a
hanger and hung the wings on my RV-6A this month.
Marty in Brentwood TN
Do Not Archive
Time: 09:59:41 PM PST US
From: Norman Hunger <norman96(at)telus.net>
Subject: Epic Riveting Day
Today was an epic day in my 13 year build. I pounded about 30 rivets
and the construction log says that hasn't happened since 2002. The bad
news came later when I discovered I hadn't dimpled the next row of
holes to their final size of screw so I had to drill everything out
again. Tomorrow I start even further behind as I will now shim it to
perfection at the bottom corners. This isn't starting off too good...

Norman Hunger
RV6A Delta BC
Do not archive




- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group