Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Main Gear Shimmy - While Braking

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
jkreidler



Joined: 13 Feb 2008
Posts: 151
Location: Sheboygan Falls WI

PostPosted: Tue Nov 24, 2009 6:19 pm    Post subject: Main Gear Shimmy - While Braking Reply with quote

We have been working on solving a main gear shimmy while braking. First just to clarify our symptoms, after landing, after the nose wheel comes down, as soon as we went to the brakes we got a shimmy. If we did not use the brakes we did not have a shimmy. We visually confirmed it was main gear shimmy. We also had a scalloped wear patter starting on our mains (80 hours TT).

I may be stating something very obvious, but the fix was very simple, we had to re-torque our axle nuts. Tightened up the nuts, and the shimmy is gone.

Just passing along an experience.....


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Jason Kreidler
4 Partner Build - Sheboygan Falls, WI
Tony Kolar, Kyle Hokel, Wayne Elser, Jason Kreidler
N44YH - Flying - #40617
Back to top
View user's profile Send private message
Strasnuts



Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

PostPosted: Tue Nov 24, 2009 7:12 pm    Post subject: Main Gear Shimmy - While Braking Reply with quote

This is why I think a lot of the gear legs are misaligned. My right gear was toed in and my left was toed out until I drilled the left gear to match the right at 1.10 degrees in.
---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours
Back to top
View user's profile Send private message Send e-mail
jkreidler



Joined: 13 Feb 2008
Posts: 151
Location: Sheboygan Falls WI

PostPosted: Wed Nov 25, 2009 4:17 am    Post subject: Re: Main Gear Shimmy - While Braking Reply with quote

I am not sure I understand your statement.... Please expand.

My point in passing this along was really to say that for us (again for us), the fix was as simple as tightening the axle nut. This solution came after checking toe, contemplating balancing tires, researching brake failure modes, etc.

In the end after hours of head scratching it was just a basic maintenance item. Possibly everyone on the list who has faced main gear shimmy issues has a different problem, but I could not find this solution anywhere. I also couldn't find a case of someone who changed their toe setting and solved the problem.


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Jason Kreidler
4 Partner Build - Sheboygan Falls, WI
Tony Kolar, Kyle Hokel, Wayne Elser, Jason Kreidler
N44YH - Flying - #40617
Back to top
View user's profile Send private message
indigoonlatigo(at)msn.com
Guest





PostPosted: Wed Nov 25, 2009 9:52 am    Post subject: Main Gear Shimmy - While Braking Reply with quote

I see that on mine also Rt In C Lf Out. Problem is not necessarily corrected by changing the hole location as it may be the bend in the gear leg itself.
 
[quote] To: rv10-list(at)matronics.com
Subject: Re: Main Gear Shimmy - While Braking
From: sean(at)braunandco.com
Date: Wed C 25 Nov 2009 03:06:28 +0000

--> RV10-List message posted by: sean(at)braunandco.com

This is why I think a lot of the gear legs are misaligned. My right gear was toed in and my left was toed out until I drilled the left gear to match the right at 1.10 degrees in.
---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Strasnuts



Joined: 10 Feb 2009
Posts: 502
Location: Salt Lake City, UT

PostPosted: Wed Nov 25, 2009 7:14 pm    Post subject: Re: Main Gear Shimmy - While Braking Reply with quote

jkreidler,
Sorry about the reply, I received it on my phone and didn't see your fix from the weird format on my phone. I just thought you had a shimmy and you didn't know what was wrong.


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
40936
RV-10 SB N801VR Flying
780 Hours
SuperSTOL 60 hours
Back to top
View user's profile Send private message Send e-mail
ajs_pvt_1(at)sbcglobal.ne
Guest





PostPosted: Wed Nov 25, 2009 7:34 pm    Post subject: Main Gear Shimmy - While Braking Reply with quote

Not obvious so some of the lesser experienced here (i.e. me). Thanks
for the info!

Andrew Stryker
Building - Empennage

jkreidler wrote:
Quote:


We have been working on solving a main gear shimmy while braking. First just to clarify our symptoms, after landing, after the nose wheel comes down, as soon as we went to the brakes we got a shimmy. If we did not use the brakes we did not have a shimmy. We visually confirmed it was main gear shimmy. We also had a scalloped wear patter starting on our mains (80 hours TT).

I may be stating something very obvious, but the fix was very simple, we had to re-torque our axle nuts. Tightened up the nuts, and the shimmy is gone.

Just passing along an experience.....

--------
Jason Kreidler
4 Partner Build - Sheboygan Falls, WI
Tony Kolar, Kyle Hokel, Wayne Elser, Jason Kreidler
N44YH - Flying - #40617


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p 74711#274711




- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group