Matronics Email Lists :: View topic - right wing done and closed

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

right wing done and closed

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

afterfxllc(at)aol.com
Guest

Posted: Fri Nov 27, 2009 7:41 pm Post subject: right wing done and closed

All,

    

   Tonight at 10:26 the right wing has had all upgrades installed, closed and is now in the books. 

   I am going to go about doing the left wing totally different and will try and make a step by step guide because alot   of the steps can be eliminated by better planning.

    

   For those of you that haven't opened your wings yet don't.... first drill the inboard double rivet row pitch 20 to rib #5 then un drill the top nose skin and place a scrap piece of aluminum over the inboard last 3 ribs and make a template of the rivet holes to be used later as the guide to set the nose ribs after the new angle is installed.

    

   I'll do this on video tonight and try and upload it to you tube and will try to stay out of the way of the camera.

    

   Jeff

   Working on left wing now

 =  [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum